We could call this an "i-stock" lol.
I thought this up last week so decided to try it out. This was made using an old duckbill ASA I had laying around, 1/2"x2' copper pipe, a 1/2" copper pipe male adapter, a tennis ball, JB Weld, black spray paint.
I made the overall length to match my 22ci tank, about 14". Shoved the pipe into the adapter which thread into the ASA, marked my measurement and then used a pipe cutter. I JB Welded the pipe and male adapter together, then spray pained. Cut a hole hole in the tennis ball, shove it in.
This can be screwed/unscrewed from an ASA, it was cheap and easy to make, was able to make it a length I like without messing with an adjustable stock, and has a rounded butt vs the shape of a T or L.
The 3D printed 86* grip on my Phantom is upswept like CCI fames, which surprised me, so waiting for a wedge to make it all leveled out. Right now the stock points upwards, I will update with pics on the marker later.
I thought this up last week so decided to try it out. This was made using an old duckbill ASA I had laying around, 1/2"x2' copper pipe, a 1/2" copper pipe male adapter, a tennis ball, JB Weld, black spray paint.
I made the overall length to match my 22ci tank, about 14". Shoved the pipe into the adapter which thread into the ASA, marked my measurement and then used a pipe cutter. I JB Welded the pipe and male adapter together, then spray pained. Cut a hole hole in the tennis ball, shove it in.
This can be screwed/unscrewed from an ASA, it was cheap and easy to make, was able to make it a length I like without messing with an adjustable stock, and has a rounded butt vs the shape of a T or L.
The 3D printed 86* grip on my Phantom is upswept like CCI fames, which surprised me, so waiting for a wedge to make it all leveled out. Right now the stock points upwards, I will update with pics on the marker later.
Comment