[MOTM] 11/23: Projects

[Shaftski]

Made good progress on this until covid got me. Once some of this long covid fog clears gonna try and finish it up.

Marker is a MAC-1 i picked up here a few years back. Finish had been stripped and the barrel cut a bit when i got it.

Patinated the brass with various shades of red brown, brown, and black. Took a few tries to get a pattern i liked, this one came out pretty good.

I still have to convert to bolt action to prevent the pump handle from scratching up/stripping the patina in spots. Redo patina on bottom tube to eliminate existing scratches. Find the right screws for grip panels. Redo finish on grip frame. Make removable stick feed. Blue the steel parts. Seal the body in rock hard clear lacquer to protect finish.

[superman]

I will finish this one some day. Needs ano, on/off, trigger and some tuning.

[Melrosejedi]

Well , i have her together and developed a leak at the solenoid. She was firing nice over the chrono but got side tracked prepping my stock class cocker for anno. Maybe next year she will hit the field.

[Super Nova]

Got this 04/05 cyborg because I loved the fade. Didn’t realize at the time how few parts were available for these but it needed the LPR spring and adjuster, rammer housing and ram, ram cap, vert ASA, feedneck. I’ve acquired all the parts even tho the ram cap and vert asa are dust blue for now. Currently at Turbo’s hopefully being brought back to life.

[Trbo323]

Got this 04/05 cyborg because I loved the fade. Didn't realize at the time how few parts were available for these but it needed the LPR spring and adjuster, rammer housing and ram, ram cap, vert ASA, feedneck. I've acquired all the parts even tho the ram cap and vert asa are dust blue for now. Currently at Turbo's hopefully being brought back to life.

If I had the noid mounting screws it would be ready for air. All the rings have been replaced.

Sent from my motorola edge 5G UW (2021) using Tapatalk

[plunderin]

Here's my ongoing sniper project. Still want to do a little milling on the body, build a auto trigger cam that fits around the extra width of the Numech frame, send it off for anodizing, and get some guts for the Pico. Probably swap the tank reg for something Ninja or Powerhouse.

Custom milled body
Numech frame tapped for a secondary pump guide rod
16" All American bored for Freak XL inserts
ODM Pump Handle
CCM S6 guide rod
CCM pump arm
CCM feed adapter
SSC feedneck stub
PE feedneck
SSC Midblock Kit
ACP Autotrigger kit
Freeflow roller sear
Inception lowers

[Arthur]

Home brew Tac One
Feed tubes have been shortened, cut down to hold only 15 vs 20
Metadyne side asa. Body is drilled to accommodate the retention screw
Barrel is PE but I’ve had it milled to accept freak inserts

[Riot]

PHASE 2: Nominations

[RAZRBAKK]

As a longbow enthusiast, I nominate Arthur 's Tac-One.

[Arthur]

Thank you

[Trbo323]

I nominate RAZRBAKK phantom thing

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Cdn_Cuda]

Melrosejedi for the Karni

[Melrosejedi]

Thanks man

[Seajay]

I've been rebuilding this System X Vengeance. Got it in a billion pieces in a random box. Many things were missing.
Replaced the bolt, added the Red System X reg, it came with a Silver one. found a barrel for it, the feedneck was crushed so still need to replace that, and needs an ASA.

It shoots!

[latches109]

I nominate JeepDVLZ45 and @superman

I don't know why I'm late.
The Forever Mag - "Forever looking for Eclipse Speedy Splash parts"

[BrickHaus]

Dammit. I wanted post in this one. I have a nice one, but alas, I forgot til it was too late.

[latches109]

same

[chplnstone]

samsies, I have a few that would fit the rules, from cocker to lever

[plunderin]

I nominate Roger7pball 's Ehm