[MOTM] January - Your Favorite Marker

[Levi]

Not flashy, but my Q-Mag is the go-to favorite. I've got the Qloader setup dialed in pretty well and it's a tight little package that's a lot of fun.

Ugly placeholder pic for now...

[JeeperCreeper]

Still one of my most used markers. My PG-8. A bolt action PGP with a shorter valve tube, 0.680 barrel tubing from Palmers, cocker detent, Bluefork frame with Stockclass Heroes 86* frame and Houges, and 2k locking bolt. This was the first one I plated myself. If Im not using it for quickdraw, I add the ported barrel extension and Docs quick changer. It can use 8 or 12 gram co2 carts.

[Riot]

Get those final submissions in, calling round two tonight!

[Cdn_Cuda]

My go to marker, my custom Karni! My 2nd custom Karni build I have done after the first one was stolen. CCM Karni pump kit, CCM frame, ID valve, Shocktech bolt. Feels just right in my hands.

[Chuck E Ducky]

That’s perfect!

[Pyrate Jim]

First time I've done this. I would submit the one in the middle.
KP-2 done over by Punisher (Lee Kinney)
Polished Nickle plate, ported valve, quick strip slot and CA adapter. I ran it remote with a Raptor adjustable reg since it did not have the velocity adjustment on the marker.
Always a joy to shoot and turned heads on the field. My primary for over a decade.

[Jordan]

This thing's been hibernating while I decide on how it'll look next... but it's still around. I'm currently collecting bits and pieces to get it back on the field.

I might paint it yellow and blue and call it the "Twinion"... open to suggestions. 🙂

[paintballedbackin88]

My 2K Right feed Belsales Evolution X. I've reluctantly sold her twice, when money was needed. I bought her back each time one of new owners needed to sell her for cash.

I was fortunate to have acquired this model in 100% stock condition. The original vasa was a chrome pre2k version without the hole drilled for the 3-way rod set screw. The original ram was a chrome STO ram, which I replaced with a later .44 magnum ram. I also swapped the stock trigger plate with a wider AKA trigger plate.

Blue elbow fittings were purchased new from ANSgear back when they sold custom colored fittings. Got lucky when I scored the factory gloss blue Shocktech trigger pants and dust blue LPR knob.

Current HPR is a custom replica of the Belsales gas-thru, which uses CP hpr v3 internals. I used to run an Air America Messiah HPR, which can be seen in the bacci video below. It is highly underrated in my humble opinion.

I've owned this marker longer than any other in my current stable, and she is the favorite. Her name is Rose. I believe she may also be the oldest, pre2k spec right feed evo out there. Serial number dates her back to a 1998 WGP right feed body. Dan Bacci video below.

https://youtube.com/watch?v=wXMP72q_L98&si=WsLoUHvECpingu4Y

[Cal440]

Like the color and your security system

[Riot]

paintballedbackin88 - Thanks for the submission, but please pick just one picture. The rest is fine. Thanks & Good luck!

[Riot]

Jordanized Mech Rainmaker.
The only marker that’s remained with me for YEARS. The only marker that has run reliably throughout. The loudest marker you’ll ever hear. This bad boy has scared more people than it’s eliminated. I imagine a tune-up will be in order sooner than later, but for now…. She runs.

[Riot]

ROUND II

[latches109]

Already! One more week.

[Riot]

Okay… slow start.


I’ll nominate Jordan and his Double Ion.

[Jordan]

Thanks bro!

[redsquirrel]

I’ll nominate NONOBLITUS’ fall Phantom. I’ve had that exact picture saved in a “pretty markers” folder for some time.

[ChuckLove]

What a great month for MOTM! With that being said, I nominate Roger7pball's single trigger Evil Ehm.