Nova Phantom Duckslide kits

[superman]

I would say it is more frustration than it is hate.
Multiple people have offered advice, designs, critiques and solutions for some of the things that nova has designed and released. Many of those things were not implemented, but were clearly pointed out early in production. I know because i regularly talk to some of those people that offered advice. They want people to enjoy and shoot autocockers, not see them as a pain to work on because of changes that could have and or should have been made pre-production with a simple conversation.

Shortened the quote to remove a bunch of autococker specific detail, but i feel like this applies to this very specific situation.
Maybe they should have had someone that actually uses a phantom assemble and test it..... before going into full production.

There are multiples of us in the state.....Myself, grendel, Nish, Plus multiples that are local to me.

[Riot]

Shortened the quote to remove a bunch of autococker specific detail, but i feel like this applies to this very specific situation.
Maybe they should have had someone that actually uses a phantom assemble and test it..... before going into full production.

There are multiples of us in the state.....Myself, grendel, Nish, Plus multiples that are local to me.

It certainly feels like they tricked guys into Beta testing this…
Hopefully, they do what they say and make it right both for those buyers and future versions.

[superman]

It certainly feels like they tricked guys into Beta testing this…
Hopefully, they do what they say and make it right both for those buyers and future versions.

I don't think that was their intention, but this certainly rings a similar bell to the cockers. Though a lot of those issues could be fixed during assembly. This not so much.

[$L!mBo]

Magageddon got a pretty crooked hole drilled in the insert with his

[Jsc5150]

JFC

[Cdn_Cuda]

Oooff.. back it goes for a refund?

[jetenginekyle]

Bet I could do better with my eyes closed.

[BLachance75]

A little comparison video you can watch to see the wobble on an actual Duckslide.

https://m.youtube.com/shorts/QF77M4g211k

[redsquirrel]

Eyyy, that feed looks so slick on there

[BLachance75]

redsquirrel it does look good on there.

[BLachance75]

Hopefully this can help some of you that bought one of the Nova slides or Nova can use it to fix their mistake.



The slot on my slide is 13/16” wide. A CCI 1 piece feed will fit.

This is the barrel clearance of a CCI barrel in a Duckslide. The hole is a hair over 7/8”.

[$L!mBo]

Thank you!

[RuleOfSines]

Their previous incarnation WarMachine's ACI Turret knockoff was similarly rough IMO, that just stayed rough but I don't think it was nearly as popular as this one.

[Super Nova]

This has definitely been a let down. It does feel like the consumer is doing the beta testing and a lot of mistakes made that should have been caught before they were sold.

[stockclass48]

Man... after seeing the videos posted, I definitely have buyer's remorse :/ Hopefully the guys at NOVA are standup fellas and do right by replacing those slides with corrections.

[RAZRBAKK]

[MrKittyCatMeowFace]

Should of bought one of these instead guys.

[$L!mBo]

we should raid the JT bst pages on FB and spam these For sale.
rile up the Flextards

[Murph]

Love my dumpster duck

[Chuck E Ducky]

Dumpster Duck lol that’s a good one Murph!

[Jsc5150]

Holy crap guys these were milled in America

I was going easy on them bc I thought they got shafted by crappy overseas machining

[Chuck E Ducky]

I don’t think they were. I thought they were scanned and sent over seas to get manufactured.

[Jsc5150]

Horses mouth says made in south carolina

[Chuck E Ducky]

Hopefully they address the issues, I’m glad I didn’t get one.

For the time being I’m going with my printed one.

[$L!mBo]

awesome!
offset feed?

[flyweightnate]

Holy crap guys these were milled in America

I was going easy on them bc I thought they got shafted by crappy overseas machining

As much as it sucks, I think domestic quality is just as varied as the cheapest import. It's all about the person, the equipment, and the communication. And I've met some American manufacturers who tend to communicate through a glass bottle more often than not. One foundry I used, the owner was unreachable after lunch, or unintelligible if I reached him.

I'm happy to hear that Nova produced in the US. Both because I want to encourage US manufacturing, and because they'll likely have more recourse to fix issues easily. Good shops certainly cost a lot more here, though.

If anyone cares, my advice is always to have 2-3 domestic suppliers with overlapping but distinct capabilities, and a foreign broker. Get a prototype guy who loves the challenge but isn't tooled for volume, a production guy, and a backup for when one of the others is slammed. Then get a foreign shop for the high-touch, low impact parts that take forever but nobody notices, like a Spyder VASA with two big threads, machining on four sides, and no moving parts. Sometimes the cheap labor on the dumb stuff makes a fair wage on the important stuff viable, without the whole project going over budget.

Low volume production is tricky in that way. You really need to choose your battle, because you don't have time or volume to optimize and automate everything. At very least, though, the design intent has to be there. Words are cheap.

[Chuck E Ducky]

It would be fairly easy to fix the issues at hand on the V1. A Delrin bushing would do wonders for the slop. Or clearance the slide at the back to fit an ASP cocker body and use a Doc Bull Cocker freak barrel. I’m planning on using a different feed anyway my round one would fit that slide easily as is it’s much more low profile then the CCI one.

Hopefully, they can get it squared away and the spec right. I will buy one if they can get it right.