Greetings all!
With Oil prices being at an all time high, and projected to get even worse, the winters here in Maine are going to be potentially deadly! With that in mind, I would like to try to raise some money for Charity to help those out that struggle.
I will donate 100% of the payment from these grips (minus shipping costs) to a local paintball friendly veteran's charity: Maine Veteran's Project (MVP) (https://maineveteransproject.org/) in a late friend of mine Bob Derosby's name. MVP strives to combat Veteran suicideby providing all kinds of events (monthly paintball events!) and helping Veterans in need, like filling oil tanks, or deliver firewood completely free to the veterans. There are a lot of older Maine veterans that can't afford the $800 monthly heating bill this winter. Not to mention all the other veteran's who still struggle acclimating to civilian life. From their website: Veterans make up just .045% of the total population yet account for 20% of all suicides in the United States.
These grips are 3d printed in wood. You can treat these like normal wood, you can sand, carve, and stain these to fit whatever you are putting these on. Keep in mind these are not as strong as SP wood grips so don't run them over with your car. These should fit just about any single or 45 frames. There may be a need for some modification. for the single hole frames I simply removed the retaining pins at the top of the grip since they are not needed on a wrap around grip. Or you could simply carve out a little more of the grip if you had aggressive retaining pins you did not want to remove.
Orders will be open until November 5th!!!! After that I will not be taking any other orders.
The cost:
Single Hole Grips $12
45 grips $15
Plus $5 shipping
*Anyone going to Reaperball on the 5th at OSG, I can deliver these and save you the shipping cost
There are three colors to choose from:
-Light wood (best for staining)
-Dark wood
-Rosewood
Please be specific which design you want and which color of wood.
I have several on hand to ship asap, but other will need to be printed and each set takes 14 hours of printing and wood printing is extremely difficult so there is a huge possibility of failures resulting in reprints! So please be patient. Depending on how many people want, it might take a lot of time to get these to you!
Once I run out of my wood spools of filament, I will no longer be selling these!
I would like to give a huge thank you to @FredMnkyDad10 for design inspiration and collaboration!
More pictures: https://photos.app.goo.gl/5eNKNaLauEoASh9L6
With Oil prices being at an all time high, and projected to get even worse, the winters here in Maine are going to be potentially deadly! With that in mind, I would like to try to raise some money for Charity to help those out that struggle.
I will donate 100% of the payment from these grips (minus shipping costs) to a local paintball friendly veteran's charity: Maine Veteran's Project (MVP) (https://maineveteransproject.org/) in a late friend of mine Bob Derosby's name. MVP strives to combat Veteran suicideby providing all kinds of events (monthly paintball events!) and helping Veterans in need, like filling oil tanks, or deliver firewood completely free to the veterans. There are a lot of older Maine veterans that can't afford the $800 monthly heating bill this winter. Not to mention all the other veteran's who still struggle acclimating to civilian life. From their website: Veterans make up just .045% of the total population yet account for 20% of all suicides in the United States.
These grips are 3d printed in wood. You can treat these like normal wood, you can sand, carve, and stain these to fit whatever you are putting these on. Keep in mind these are not as strong as SP wood grips so don't run them over with your car. These should fit just about any single or 45 frames. There may be a need for some modification. for the single hole frames I simply removed the retaining pins at the top of the grip since they are not needed on a wrap around grip. Or you could simply carve out a little more of the grip if you had aggressive retaining pins you did not want to remove.
Orders will be open until November 5th!!!! After that I will not be taking any other orders.
The cost:
Single Hole Grips $12
45 grips $15
Plus $5 shipping
*Anyone going to Reaperball on the 5th at OSG, I can deliver these and save you the shipping cost
There are three colors to choose from:
-Light wood (best for staining)
-Dark wood
-Rosewood
Please be specific which design you want and which color of wood.
I have several on hand to ship asap, but other will need to be printed and each set takes 14 hours of printing and wood printing is extremely difficult so there is a huge possibility of failures resulting in reprints! So please be patient. Depending on how many people want, it might take a lot of time to get these to you!
Once I run out of my wood spools of filament, I will no longer be selling these!
I would like to give a huge thank you to @FredMnkyDad10 for design inspiration and collaboration!
More pictures: https://photos.app.goo.gl/5eNKNaLauEoASh9L6
Attached Files
Comment