Turn that old right feed body into an offset vertical feed!

[FredMnkyDad10]

I am a huge sucker for offset vert feeds!!! I also truly dislike the height of right feed elbows. Which means I purged all my right and left feed bodies! However, I will now be on the hunt for a nice one! I am sure I'll be in touch as soon as I find the right right feed body!

It would be awesome if you offered something similar for mags as well. Luke's used to offer a service to do it, but he stopped modding other peoples work, so no one does it anymore!

Get out of my head.

I was thinking the same it would be very cool to have this made. Either directly solder on to the body. Or maybe the two holes can be made on the body, threaded for the neck to be held by two screws. Or maybe two nuts can be solder/jb weld onto the body, the neck adapter would cover the nuts as its held by two screws.

[OpusX]

PMed to get this started

[evilfishsticks]

ooh, I really like this. once it's too cold out in January/ February, I'll be sending you a pm to get this done.

[Brokeass_baller]

Do you have any blems? I don't mind paying full price. I have an "ugly" Autococker that I love so much, and a pristine offset feed neck would just look off. It's faded on the right side, and the pneus are petined, and it has an ANS regulator top with an Automag valve back as a regulator. It's so wonky and weird, I'd hate to mess it up with a really nice feed neck. Lol. It's my favorite Autococker though, and it deserves this awesome modification.

[William the Third]

I kind of want to see pictures of this ugly cocker!

[Brokeass_baller]

I'll snap photos tonight. She's beautiful.

[mueller]

bravo, awesome option and very reasonable price.

[Jordan]

I'm torn between getting this done to my SC Sniper to make an OC pump or leaving it alone.

Any chance this could be made to be removable?

[XEMON]

Bore out the body a bit and put a set-screw to hold everything?
I can see that 🤔

Waiting for them to na available by themselves to play with ...

[Brokeass_baller]

William the Third, this is the ugly 'cocker. Faded on the passenger side, ok on the driver's side, brass pneus plus a Rock and Clippard brass QEV (I have another I need to add), ANS Automag regulator, random ass CO2 fill station ASA, and I run a Freak XL in a Sconi Dye back, and Nummech Telos kit in the Benchmark.

I bought it from a user here, but with crappy cell phone pics, I couldn't see how bad the fading was. It wasn't mentioned in the sale either. But the price was right, and honestly, once I received it, I feel in love with the flaws.

[Meleager7]

was this thing displayed on a wall, with that one side facing a window and sunlight?

[Brokeass_baller]

William the Third, right? It's so ugly that it's beautiful. She's a total sleeper too. The trigger pull is so light and snappy, and I trimmed a steel pin and use it as a rear trigger stop (very tedious, but worth it). She has a Shocktech Phat hammer, and a Palmer low turbulence valve. I swear by the Phat hammers. Maybe it's just placebo, but that brass makes the recock buttery.

Meleager7, no idea. I received it like this. The seller had garbage quality photos, like he was still using a Nokia flip phone. I thought it was just black. Came with a hinge frame, stock pneus and internals. When I received it, I was initially irritated about the fading, but after a day or two it grew on me, and I never reached out to the guy or anything. I just started adding random crap to it. The slider was a must, and I had nothing else that matched my gray ANS reg, so I slapped that on. The burst disk was missing, so I took one from an old CO2 valve and used that. After seeing Jake had a few Phase II Automag reg backs, I thought it would be hilarious to use that instead of the stock reg housing. So I have a Mag on my Cocker. (Maybe I'm the only one that thinks that's funny) I had an on/off cage laying around, and the ugly brass/stainless lines, so I used that. Had a fill station on/off, so I threw that on there.

Eventually, I want to have the stock WGP barrel (or maybe a cheap brass barrel) XL bored, and then I'm going to hand drill porting at the end. Make it look nice and buggered. This thing has become the anti-agg paintball gun, and I think that's why I like it so much.

[MrBarraclough]

There's is something slightly sacreligious about having part of an Automag on your Autococker. But also funny. At least it is an aftermarker ANS reg body. An actual OEM body with half of the 68Automag laser etching still on it would be an outrage.

The right side of that body actually looks pretty cool. If only there was a way to reliably fade the left side to match.

[Grendel]

Would you be willing to do this for a RF Sterling? I'll do some measurements today but I am pretty sure the extrusion dimensions are similar.

[OpusX]

Alrighty I have two bodies out for this mod. I'll have pics for the group when they are back.

[nobbie333]

Alrighty I have two bodies out for this mod. I'll have pics for the group when they are back.

[OpusX]

Ok technically one is for nobbie333 ;-)

[fierymartel]

PM'ed, gotta a cool cocker for this!

[OpusX]

These mods deliver! I added a Nummech high rise clamping neck and it is essentially the same height as an old school elbow but rock solid

[Chuck E Ducky]

Nice looks clean!

[nobbie333]

This is a must have for all my autococker body that are not vertical feed

[WORR13]

ooo i like. im gunna have to get some of these

[evilfishsticks]

sent you a pm, interested in having this done.

[djeclypse]

I was resisting doing this, seeing as how a basic elbow does work. But damn do they look so nice and purdy with a proper feedneck. So tempted!