I've been working on another batch of the valve bodies that let you mount the ICD lever changer straight inline with the Phantom. And, by popular request, I've made a few that fit the original 007-profile Nelsons as well- which includes a ton of pumps like early Bushmasters, Outlaws, Spartans/Centurions, and others.
I have a huge batch of various parts heading off to anno, hopefully by the end of this coming week. But, I thought I'd offer a few up unannoed in case you're planning on having the entire gun done, and want it and the lever to all match.
The one on the far left is a full blank. Just the valve chamber and threading. Don't know if any of you need such a thing, but I have a couple spares and I figured I'd throw 'em up. In case any of you have some oddball Nelson-based gun and want to custom-make a valve body.
Second from the left is the same thing, but turned on the end for original Nelson. No other machining- turn it down into a LAPCO style hose-only valve body, machine it to take an internal velocity adjuster, whatever. Don't imagine there'll be too much desire for either of those, but I have a few on the tables, so if you need one, let me know.
Call either of those $20 each plus shipping.
The next two are (almost) fully machined to attach the ICD lever changer to your pump. Right-hand one is Phantom, second from the right is 007-style Nelson. These particular ones still need the various holes drilled and tapped, but if you want one, it'll come fully machined and ready to anno and install.
Call these $45 plus shipping.
For any of these, you can hit me at sales(at)docsmachine(dot) com with what you want, and I can get you a total or send you a PayPal invoice.
But if you want the finished one, please hurry. Whatever I have left is heading out to anno this coming Friday or Saturday.
Oh, and if anyone's curious how they're made... well, I'm not going to impress many real production shops, but then again, no 'real production shop' would touch the low-volume parts I make.
Doc.
I have a huge batch of various parts heading off to anno, hopefully by the end of this coming week. But, I thought I'd offer a few up unannoed in case you're planning on having the entire gun done, and want it and the lever to all match.
The one on the far left is a full blank. Just the valve chamber and threading. Don't know if any of you need such a thing, but I have a couple spares and I figured I'd throw 'em up. In case any of you have some oddball Nelson-based gun and want to custom-make a valve body.
Second from the left is the same thing, but turned on the end for original Nelson. No other machining- turn it down into a LAPCO style hose-only valve body, machine it to take an internal velocity adjuster, whatever. Don't imagine there'll be too much desire for either of those, but I have a few on the tables, so if you need one, let me know.
Call either of those $20 each plus shipping.
The next two are (almost) fully machined to attach the ICD lever changer to your pump. Right-hand one is Phantom, second from the right is 007-style Nelson. These particular ones still need the various holes drilled and tapped, but if you want one, it'll come fully machined and ready to anno and install.
Call these $45 plus shipping.
For any of these, you can hit me at sales(at)docsmachine(dot) com with what you want, and I can get you a total or send you a PayPal invoice.
But if you want the finished one, please hurry. Whatever I have left is heading out to anno this coming Friday or Saturday.
Oh, and if anyone's curious how they're made... well, I'm not going to impress many real production shops, but then again, no 'real production shop' would touch the low-volume parts I make.
Doc.
Comment