New Sheridan Fast-Changers!

[Cal440]

That is real good news Doc!

[cougar20th]

Curious if o w could be adapted to work on my bastard long KP2. I'll shot you a message on the weekend with some pictures.

[DocsMachine]

Curious if o w could be adapted to work on my bastard long KP2. I'll shot you a message on the weekend with some pictures.

-Once I have the rest of the knobs back, I was going to make a few long ones for the PMI-1/PMI-2, and the P-68-SC, among others. I'd probably have to custom-fit one if yours is wildly non-stock, but if it can take a standard PGP 12-gram plug, yes, these can be made to fit.

Doc.

[cougar20th]

Excellent

[JohnB]

Could use one in kp3 length if that is an option when you get to the longer ones.

[Jordan]

When I installed my PPS Fastchanger on my KP, I re-used the KP rod to adapt it to the rifle. AFAIK the other P-series pumps shouldn't require specific parts unless you're missing them.

[Chuck E Ducky]

Dose that rod just twist out with enough force? I looked at mine today quickly and wasn’t sure it don’t look like it’s bolted threw or pined in. I was going to mess around with my PMI II see if I can adapt one of my changers. With a speed demon and fast changer it would make a great shooter.

[Jordan]

It threads into the cap - they're tight, so you might need pliers or Vice grips, but they come out.

[$L!mBo]

whenever the next batch comes, id like one please


.....aaaand two more

[redsquirrel]

Same here!

[IndustrialHalo]

I want one when the next set is ready.

Thanks for making these Doc!

[Axel]

Look, I'm gonna reluctantly buy one but you're still gonna be haunted by the ghost of Cooper-T and quite possibly burn for eternity in hell for anodizing those pushers red even if I love it which I do ❤️ How do I give you money

[DocsMachine]

Look, I'm gonna reluctantly buy one but you're still gonna be haunted by the ghost of Cooper-T [...]

-How do you know I'm not just a reincarnation of Chauncey?

(In reality: The old TASO ones had a plain, unanodized cup, and the Palmer ones had a matching black-anno cup. I was going to have 'em annoed anyway, why not red? )

I haven't heard back today, like I was supposed to, but if all goes according to schedule, I'll have the rest of the knobs by the weekend. Stand by!

Doc.

[XEMON]

They fit absolutely perfectly, super smooth!

[jeramiej]

Get on it! And in single-shot to boot.

[XEMON]

Single shot is a lot easier, getting the feed tube to hold well enough for GameDay is a real challenge

[tyronejk]

Is that pump handle 3D printed in wood? If so, pretty neat! And rare to see outside of R&D

[crazyboy78]

Add me to the list. I could use one for my P68-SC.

[pdogg77]

Please add me to the list as well when they're ready. I'd like 2 PGP ones and if you can make the P86-SC one I'll take one of those as well.

[DocsMachine]

And we're back! I apologize once again for the radio silence, but I only just got the 'lost' knobs back in on Thursday. I've been in the middle of a few other things, but I've so far assembled nearly a hundred, and have parts to finish nearly that many more.

In other words, they're back in stock, and will be for the foreseeable future.

As before, I'm asking $55 each. I can do Global Advantage (the old First Class) for $4.50, or Priority for $9.50. For those of you in Canada, GA will be about $17 (again, sorry, I don't set the prices) and Priority would be $35. I can fit a dozen in a small Flat Rate box if you want, so if you need more than one, use the Priority price. (Both US and Canada- overseas, email for a quote.)

My PayPal address is ordering (at) docsmachine.com

I'm a bit booked up for the moment, but I hope to have PMI-1 and P-68-SC length before too long, and if somebody can loan me some measurments, I can whip up a KP length as well.

Thanks for your patience!
Doc.

[$L!mBo]

sent dollars for 2

[DocsMachine]

Gotcha covered, Slim!
Doc.

[Jordan]

What measurements for the KP? Just the pushrod between the knob and cup? I can grab that for you later if that's all you need.

[Jordan]

DocsMachine - I've got a KP2... from the end of a 12gram to the end of the lower tube, it's 8".

[DocsMachine]

Thanks J! Did you want one?
Doc.

[Jordan]

DocsMachine - happy to help! My KP has a Fastchanger already, I just swapped the factory pusher setup over into the 'changer knob. Seems to work great.
I did get in on a group order of your Fastchangers, though - got two on the way to me right now.

[DocsMachine]

And now on eBay!

I have a couple other projects I need to mop up, first, but if you'd like a PMI-1 or 2, or P-68-SC length, or either KP, let me know here. (And, please, only if you're looking to buy. ) When I get a chance, hopefully in the next couple of weeks, I'll make a handful of those, both for you gents and to put in the stores.

Thanks for all your patience!

Doc.

[crazyboy78]

Looking for a P68-SC length. For sure gonna buy as I can't stand the stock knob.