Request from PGP Junkies

[Myfeetupontheground]

Hi everybody,
One of the things I have had a hard time with is getting feedback about the products. If you have ordered from PGP Junkies, please consider dropping a comment about your order. Pics are also appreciated! I am particularly interested in anyone's opinion of the velocity adjuster. I worked allot on the design of that product, and I would love some feedback. Thank you in advance for any feedback you may give.

-Isaiah

[gabe]

I bought a couple of the lapco trigger shoes when you released them. Shipping was almost immediate and I can't say enough great things about your service. Keep it up, the brass lovers need a great company like yours to support the old guns!

[Myfeetupontheground]

Thank you for the comment! I am doing my best to source and provide everything I can.

[Jsc5150]

So far I’ve bought a pgp valve, basically all your seals, a tshirt and an RVA just now

So far I’ve used a phantom cupseal and the Tshirt, both great.

I bought the RVA bc I noticed you chamfered it to make room for the old style knurled bolt, which is a really nice touch. I love my fancy NSD2 ribbed one but I’ll need a different bolt to use it, unlike this one

[Jsc5150]

@Myfeetupontheground

Go ahead and send it, no worries.

It looks like it will work, but if not it’s not a big deal if I need to trim some fat from the bolt

[Myfeetupontheground]

I will be sending you one already modified to make sure it will work with a knurled Aluminum bolt.

[Jsc5150]

You’re the man!

[stockclass48]

I purchased a RVA, Phantom Seals, PGP Component and Cartridge valve rebuild kits and have to say I'm very pleased! I haven't used the rebuild kits as they are kept in my spare paintball parts box, but the seals I have used and they do what they are intended. If anyone has a Phantom Phrame from Phrame work designs, make sure to get yourselves your 12 gram seals from PGP Junkies! They are much better than the Nylon ones in my opinion currently sold by EV.

[flyweightnate]

I came to a similar conclusion

[cheapguitarscheapthrills]

Bought a rear velocity adjustor super happy with fit and finish but unfortunately I haven't gotten a chance to play with the PGP yet as it's off getting pretty with JeeperCreeper Isaiah is a solid dude and threw in a seal last minute with my order free of charge (already paid) cause mine was in crumbles. St. Isaiah of PGPs if you ask me

[Myfeetupontheground]

Thank you for the comment! I am glad everything worked for you!

[Impactfour]

I've placed a few order, I think just for seals and o rings. Everything has worked flawlessly and arrived real fast

[Myfeetupontheground]

Thank you for the feedback! I hope I can continue to offer parts that work flawlessly!

[RichM]

I ordered the cartridge valve rebuild kit, a pierce pin, and some extra 12gram seals. Shipping was fast and the parts worked great, I noticed an improvement in how the marker ran after the rebuild with the new pierce pin.

[Myfeetupontheground]

Thank you for the feedback! I am very happy you noticed an improvement!

[Swedgin!!]

I also placed an order. Couple pins, a rebuild kit and face seals. It’s nice to have another website that helps out the brass community.

[Myfeetupontheground]

Thank you for the comment! I am doing my best!

[BSmiff]

Got all the seals and orings I needed to rebuild a seized up old warhorse, and the RVA. Everything fit correctly and I'm very impressed with the RVA. Would love to see a brass version, not sure that's feasible. Haven't played with it yet, but it shoots good in the back yard. Thanks for helping me get this gun working!

[Myfeetupontheground]

Thank you for the comment! I am glad everything has worked the way you want!