Unfortunately, Shapeways (the vendor these items were printed by) is going out of business. As a result, I'm taking these items off of this post to avoid the possibility of someone potentially placing an order and not receiving it. I will post up again once I setup shop with another printing service.
-
-
I like the emek cap! Do you have more designs on the way for those? -
Thanks! I'm mulling some ideas around right now actually.Originally posted by euangelion View PostComment
-
I would love to see a 007 (R7) under cocking ish kit
And a bigger, deeper pump for side tube sheridans... ?Comment
-
Nope
I have that pump handle for the R7. I am looking for one that acts more like a phantom UC kit. Likely the same pump arms, but with a larger, blockyer lower section?
For the Sheridan, I am looking for one that fits around a side tube, but also has the blocky lower grip section. -
Hmmm. The UC kit would be tricky through Shapeways. They charge by the part and plastic probably wouldn’t be the best option for anything but the pump handle itself.
As for the side tube, I would need a gun to test fit it to. Come to think of it, the same would also go for the R7 if it could be done.
In either case, it would probably get pretty expensive what with all the design work, prototyping, and final printing required.
-
-
I received my sample from Shapeways today. Here is what you can expect if you order one for yourself. This bolt cap was printed in their PA12 black material. The part feels solid and layer lines are nearly indiscernible. The part pretty much looks and feels nearly identical to the stock GRN Emek body. Removing the bolt is significantly easier now and I think it looks great. I'll be keeping this part on my Emek from now on.
Comment
-
Nice work!Originally posted by MAr "... Nish deleted it..."
Originally posted by Painthappy "...I like what nish did..."
Originally posted by Axel "coffee-fueled, beer-cooled."
Originally posted by Carp "Nish's two brain cells"
Master Jar-JarComment
-
It looks like Shapeways is currently running a 15% off special for first time buyers using code "myfirstprint" for Nylon 12 (Versatile Plastic), Nylon 12 MJF, and Fine Detail Plastic.Comment
-
-
I have updated my Shapeways shop with new models that are available now.
Knurled Extended Emek / Etha 2 Bolt Cap
This bolt cap is extended 1 cm longer than the stock bolt cap and has a knurled surface for grip.
Sheridan PGP2 Rear Sight
This sight rail replaces the speed feed on the Sheridan PGP2 by slotting into the opening where the speed feed would slide back. Once installed, the rail is locked into place and will not slide or rotate. This model is intended to be used in conjunction with my PGP2 feed cap and front sight.
Sheridan PGP2 Front Feed Cap & Sight
This model is designed to be used in conjunction with my Sheridan PGP2 sight rail and feed cap. It replaces the more fragile stock Sheridan PGP2 feed cap and fiber optic sight.
Sheridan Pump Handle
This pump handle is for Sheridan & PMI stock class paintball markers.
TR50 Speed Wheel
This is a speed wheel designed to fit the Umarex TR50 & HDR50 paintball revolvers. It attaches to the existing CO2 knob using a friction fit to make swapping out cartridges faster and easier.
Comment
-
Could you do a longer version of the Sheridan pump handle? I like that style and I'm always looking for different styles to try on my stockers💀 PK x Ragnastock 💀Comment
Comment