Welcome to MCB! If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Comes exactly as pictured, body is 9/10, although the Eclipse decals have seen better days, the gun is shooting perfectly, it got a new noid and LCD board, the bolt kit was also rebuilt. Asking $250 Priority shipping included
In terms of OEM parts, all I have are DYE DM3 Matrix Eye Sets - DIY pre-crimped kits, complete assemblies
OEM Gen-E eye sets. They come pre-crimped from factory in the correct configuration, they just need the diodes soldered. You get a complete set with a receiver and an emitter diode, and 4 pcs. of heat shrink tubing for the joints. The connector comes pre-crimped in the correct configuration with the two signature ground connections doubled in the same port, etc. and I have the OEM diagram so that you can connect the correct cables to the correct sides of the diodes (courtesy of Paul @ Cousin's formerly Gen-E)
$10 + $3.00 shipping /ea, I offer combined shipping for multiple sets
And these which are NYX and DM4-Dm7 eye wirings, also factory crimped (no diagram for these unfortunately, youll have to clone them or test for the right
config)
Comment