Since I'm moving to primarily mech guns its time to part with my last electro. This one has been with me a while and despite their reputation as unreliable it's been an absolute tank and works every time I've taken it out.
For sale here is a Dye DM3 with AKA 2 Liter reg, AKA SCM II lpr, AKA clamping feedneck, and CP on/off asa. Barrel is stock but the first run DM3's stock barrel was a Dye Ultralight just milled down to a straight profile so it shoots great. I've swapped it back and forth but the stock barrel just shoots absolute darts. I also have a spare board and 2 extra bolt kits to send out with it as well as spare o-ring kits. Nothing wrong with the bolt in it but it came with spares so they go with it. The bolt in the gun has the top hat mod done by slipping o-rings over the tophat to reduce volume (increase efficiency) as well as the bolt had been polished by the previous owner so that it had less stiction. I can verify this as it uses just oil instead of grease, holds air, and doesn't require any anti bolt stick programming to keep it from shooting low first shot. Right now it's tuned for stupid low LPR pressure and very high dwell to shoot brittle paint.
Condition is what you see in the pictures, it has some rash on the body as it is a player's gun but internally its mint and you can see there is virtually zero breech wear. Everything works as it should.
Anyway, this gun is a gem and considering it has over $200 of AKA parts on it I figure its a good deal at SOLD$360 shippedSOLD. I do payment via Paypal or Venmo and ship USPS priority with insurance.
For sale here is a Dye DM3 with AKA 2 Liter reg, AKA SCM II lpr, AKA clamping feedneck, and CP on/off asa. Barrel is stock but the first run DM3's stock barrel was a Dye Ultralight just milled down to a straight profile so it shoots great. I've swapped it back and forth but the stock barrel just shoots absolute darts. I also have a spare board and 2 extra bolt kits to send out with it as well as spare o-ring kits. Nothing wrong with the bolt in it but it came with spares so they go with it. The bolt in the gun has the top hat mod done by slipping o-rings over the tophat to reduce volume (increase efficiency) as well as the bolt had been polished by the previous owner so that it had less stiction. I can verify this as it uses just oil instead of grease, holds air, and doesn't require any anti bolt stick programming to keep it from shooting low first shot. Right now it's tuned for stupid low LPR pressure and very high dwell to shoot brittle paint.
Condition is what you see in the pictures, it has some rash on the body as it is a player's gun but internally its mint and you can see there is virtually zero breech wear. Everything works as it should.
Anyway, this gun is a gem and considering it has over $200 of AKA parts on it I figure its a good deal at SOLD$360 shippedSOLD. I do payment via Paypal or Venmo and ship USPS priority with insurance.
Comment