As explained in my thread over on The Nation, I'm putting a fair amount of Smart Parts Impulses up for sale. Shoot me a PM if you’re interested in anything, and I’ll get you a fair amount of photos of the marker(s) to look over and assess. As always, I’m happy to answer any of your questions. I've been here a while, but lost my status back when the site was attacked.
Please be aware that all markers are sold as-is, and transactions will go through Paypal; I welcome any questions or concerns you may have about them, and I will respond appropriately and get you the information you need to decide whether or not you would like to purchase one (or more) of the markers. I do not have enough time to test each of these with air, especially all of the Impulses. However, as far as the Impulses go, unless otherwise specified in the descriptions below, a simple rebuild is all you might need to get the marker running (if one isn’t still in appropriate shape from the last time I rebuilt it).
Feel free to offer. Just no lowballs, please.
Adrenaline Impulse - SOLD
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, stock internals, and an Empire regulator.
White Leopard Gameface Impulse - SOLD
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, CP reg, and stock internals. The board tray is wrapped with white carbon fiber wrapping, which will get dirty fairly easily if a protective coating isn’t applied to it. The tray beneath the wrapping is a matching dust silver in great shape, aesthetically. The wrap can be easily removed if desired.
32 Degrees Blue Leopard Impulse with OTB Frame - SOLD
- Marker may need a rebuild. Working stock vision board and eye with a clicking noid; evil Punch Kit, delrin bolt, NDZ LPR, Evil Pipe, and a stock valve. All of the blue leopard print is hydro dipping. The marker also comes with an undermount Max-Flo in gloss black with a dust blue cap that is in great shape, which I will provide you pictures of if you are interested since I can not fit any more photos on this thread (the blue grip is just a gas-thru grip, and a regulator of some kind must be used).
Blue, Black, And Carbon Fiber Gameface Impulse - SOLD
- Marker may need a rebuild. Working stock vision board and eye, clicking noid, and stock internals. The left and right sides of the board tray are wrapped with black and gray carbon fiber wrapping, which will get dirty fairly easily if a protective coating isn’t applied to it. The eye cover, feedneck tab, LPR knob, and front/back of the board tray are hydro dripped with black and gray carbon fiber hydrofilm. Dipping the entire tray resulted in a subpar appearance of the carbon fiber pattern, which is why I chose to dip two sides of the tray and wrap the other two sides. The anno on the tray beneath each of these layers is a matching dust blue, and it is in great shape aesthetically. The hydro dipping can be removed from it with alcohol. And the wrapping just peels off with some effort if desired.
32 Degrees Cotton Candy Impulse #1 (Pink/Purple Dominant) - NO LONGER FOR SALE
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, and stock internals.
32 Degrees Cotton Candy Impulse #2 (Blue Dominant) - SOLD
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, and stock internals. The only part I never acquired to complete it (to my liking) is the blue Max-Flo reg body housing. Hence the silver housing, but I can swap that for a gloss black housing if you’d like.
Meteor Impulse - NO LONGER FOR SALE
- Marker will need a rebuild. The board is a vision board, but the vision is finicky and works when it wants to (the non-vision mode still works flawlessly). The rear plastic screw that secures the daughter board broke off into the threads; it will need to be extracted if you want to utilize the thread hole. Otherwise, just be careful when disassembling and assembling and it will work. It has a clicking noid, a delrin bolt, and stock internals.
Gray And Navy Blue Fade Strange Impulse - SOLD
- Marker will need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, and stock internals.
Stock Rasta Impulse - NO LONGER FOR SALE
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, CP gas thru grip, undermount max-flo, and stock internals. *****It will come with a Jackhammer II (in great condition), not the micro LPR*****
Stock Black And Green Evil Impulse - SOLD
- Marker may need a rebuild. Working Blackheart board with eye, all Evil internals, a clicking noid, and delrin bolt. The idea was to use the decals to acid etch their outlines onto the body, followed by an anno job. But I never got that far with it.
Stock Silver And Gold Impulse - SOLD
- Marker will need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, undermount max-flo, and stock internals.
Stock Blue And Chrome/Polished Impulse - SOLD
- Working stock vision board and eye, a clicking noid, delrin bolt, undermount max-flo, and stock internals. No board tray buttons. Marker will also need a rebuild. The board tray needs another round of polishing to shine, and the Max-Flo had its anno stripped, but has not been polished at all, yet. My plan was to have these parts dipped in chrome eventually, which surprisingly wasn’t drawing expensive quotes from shops around my area in Orlando, Florida.
Please be aware that all markers are sold as-is, and transactions will go through Paypal; I welcome any questions or concerns you may have about them, and I will respond appropriately and get you the information you need to decide whether or not you would like to purchase one (or more) of the markers. I do not have enough time to test each of these with air, especially all of the Impulses. However, as far as the Impulses go, unless otherwise specified in the descriptions below, a simple rebuild is all you might need to get the marker running (if one isn’t still in appropriate shape from the last time I rebuilt it).
Feel free to offer. Just no lowballs, please.
Adrenaline Impulse - SOLD
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, stock internals, and an Empire regulator.
White Leopard Gameface Impulse - SOLD
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, CP reg, and stock internals. The board tray is wrapped with white carbon fiber wrapping, which will get dirty fairly easily if a protective coating isn’t applied to it. The tray beneath the wrapping is a matching dust silver in great shape, aesthetically. The wrap can be easily removed if desired.
32 Degrees Blue Leopard Impulse with OTB Frame - SOLD
- Marker may need a rebuild. Working stock vision board and eye with a clicking noid; evil Punch Kit, delrin bolt, NDZ LPR, Evil Pipe, and a stock valve. All of the blue leopard print is hydro dipping. The marker also comes with an undermount Max-Flo in gloss black with a dust blue cap that is in great shape, which I will provide you pictures of if you are interested since I can not fit any more photos on this thread (the blue grip is just a gas-thru grip, and a regulator of some kind must be used).
Blue, Black, And Carbon Fiber Gameface Impulse - SOLD
- Marker may need a rebuild. Working stock vision board and eye, clicking noid, and stock internals. The left and right sides of the board tray are wrapped with black and gray carbon fiber wrapping, which will get dirty fairly easily if a protective coating isn’t applied to it. The eye cover, feedneck tab, LPR knob, and front/back of the board tray are hydro dripped with black and gray carbon fiber hydrofilm. Dipping the entire tray resulted in a subpar appearance of the carbon fiber pattern, which is why I chose to dip two sides of the tray and wrap the other two sides. The anno on the tray beneath each of these layers is a matching dust blue, and it is in great shape aesthetically. The hydro dipping can be removed from it with alcohol. And the wrapping just peels off with some effort if desired.
32 Degrees Cotton Candy Impulse #1 (Pink/Purple Dominant) - NO LONGER FOR SALE
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, and stock internals.
32 Degrees Cotton Candy Impulse #2 (Blue Dominant) - SOLD
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, and stock internals. The only part I never acquired to complete it (to my liking) is the blue Max-Flo reg body housing. Hence the silver housing, but I can swap that for a gloss black housing if you’d like.
Meteor Impulse - NO LONGER FOR SALE
- Marker will need a rebuild. The board is a vision board, but the vision is finicky and works when it wants to (the non-vision mode still works flawlessly). The rear plastic screw that secures the daughter board broke off into the threads; it will need to be extracted if you want to utilize the thread hole. Otherwise, just be careful when disassembling and assembling and it will work. It has a clicking noid, a delrin bolt, and stock internals.
Gray And Navy Blue Fade Strange Impulse - SOLD
- Marker will need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, and stock internals.
Stock Rasta Impulse - NO LONGER FOR SALE
- Marker may need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, CP gas thru grip, undermount max-flo, and stock internals. *****It will come with a Jackhammer II (in great condition), not the micro LPR*****
Stock Black And Green Evil Impulse - SOLD
- Marker may need a rebuild. Working Blackheart board with eye, all Evil internals, a clicking noid, and delrin bolt. The idea was to use the decals to acid etch their outlines onto the body, followed by an anno job. But I never got that far with it.
Stock Silver And Gold Impulse - SOLD
- Marker will need a rebuild. Working stock vision board and eye, a clicking noid, delrin bolt, undermount max-flo, and stock internals.
Stock Blue And Chrome/Polished Impulse - SOLD
- Working stock vision board and eye, a clicking noid, delrin bolt, undermount max-flo, and stock internals. No board tray buttons. Marker will also need a rebuild. The board tray needs another round of polishing to shine, and the Max-Flo had its anno stripped, but has not been polished at all, yet. My plan was to have these parts dipped in chrome eventually, which surprisingly wasn’t drawing expensive quotes from shops around my area in Orlando, Florida.
Comment