Hi, my name is Brian and I'm a Hoarder...phew step 1 complete.
I just re-created my account the other day but I have been on here since about 2012? I've only purchased previously and have never sold anything.
If you need any additional info or pictures on anything let me know and I will see what I can do.
So I have a few guns that I'm ready to part ways with (sorta). They mostly hang on the wall above the fireplace and have not gotten much attention lately.
I'm not the most current on pricing but I'll list the prices I feel comfortable selling at. If nothing moves, I might give Ebay a shot as well.
Otherwise their spots on the wall might remain occupied 😁.
SOLD ~~~~ Shocker Sport Turbo - $250 ~~~~ SOLD
Marker powers on and solenoids click, it worked the last time it was aired up which has been much to long so it probably over due for some new orings.
By no means is this marker pristine. There is marring on the front and rear caps as well as the Bolt assembly knob.
It has the aluminum bolt so there is also wear in the breach.
On off switch installed in hand grip. A Blue LED light was added to the rear of the gun (hole drilled in tray) that turns on with the power.
NDZ Trigger
Nummech Vertical Reg Adapter
Evil Detonator Reg
DS Board with Select Fire switch added.
Smart Parts On/Off ASA
Freak Barrel with Stainless .689 insert
Spare/Extras included:
Max Flow Reg with various fittings included to mount vertically or horizontally below barrel
Front Grip adapter
Evil "The Part"
Stock Trigger
Large Pressure gauge that came with gun
Spare Elbow
Shocktech drop forward
Duckbill ASA
Phat On/Off ASA
Dye Boomstick (Not Pictured and I don't know the bore size, but most paint would roll out of it so it's definitely a larger bore)
More Photos
SOLD ~~~~ICD Naughty Dog FS7 - $250 ~~~~ SOLD
Powers on and solenoid clicks, worked the last time I used/tested it.
Breach is clean.
CP Blade Trigger
JDS LPR
NDZ On/Off ASA
Snatch Grip bolt assembly pin
Green led eyes.
Stock Barrel
Stock Reg
Predator Lite board
Spare/Extras included:
Proto Gun Case
Stock ICD Grip
Stock ICD On/Off ASA w/ ICD gauge
Stock LPR (has significant marks and may be missing parts, came with gun this way when I got it)
Stock trigger
Stock bolt assembly pin.
More Photos
SOLD ~~~~ Infinity Legend - $250 ~~~~ SOLD
Powers on, solenoid clicks. Battery was dead so there will not be one included but it worked the last time it was used.
There is some wear on the bottom of the breach and tip of the barrel, otherwise it's pretty clean.
The power wires broke from the harness connector so they have been soldered directly to the board.
Rhino Spring
Infinity Soft Tip Bolt
Infinity ASA
CP Reg
Stock WAS board? It is NOT the Tadao board
Spare/Extras Included:
Proto gun case
Stock Bolt and Spring
Prototype "Rutley Rammer"s with bolts. They were custom made by a guy on PBnation and I tested them out. Parts were made much lighter to run lower pressures and they did work. I just liked the quick pull pin bolts better.
Prototype reg extension air chamber? Also from "Rutley". I don't remember exactly what the claim was for this part, never used it.
More Photos
SOLD ~~~~ ICD Promaster - $275 ~~~~ SOLD
Powers on, solenoid clicks. Worked the last time I used/tested it.
There is some wear at the bottom of the breach. Scratches on barrel.
I don't want to part it out, but I won't be upset if someone else does.
CP Blade trigger
AKA SCM III LPR
Crammer
Kila Eye Covers and magnetic detents
Kila drive board
Dye Hyper 2 Reg
CCM Low profile feedneck
NDZ On/Off ASA
CP 2 piece barrerl (.689 & .693 backs)
Shocktech bolt & Pin (Jewel on pin has fallen off)
Pink LED eyes
Pink LED power indicator light
Spare/Extras Included:
Proto gun case
Stock Barrel
Stock LPR (has marks on screw cap)
Stock Reg
Stock Trigger
Stock Eye Covers and detents
Ebay Valve (I had issues with it leaking)
Stock rammer with lightened delrin hammer (I did scratch up the shaft when installing this)
Stock hammer
Stock board (4th dip switch is broke, but it's position is not changed much for most settings.)
After market clamping feedneck
ICD Parts kit (barbs, seals and a few o-rings)
O-ring rebuild kit
Stock, Shocktech and ebay bolt pins (do not work with the crammer)
QEV (unsure why I have this one in my parts box)
Stock LPR spring and other Spyder springs (I think)
Manual and Parts sheet.
More Photos
Extras
I have two Loaders I can ADD with any marker if anyone would want them. (first come first serve)
I will only add them and not sell individually.
Viewloader Evolution: FREE if you want it
It has been Glued and Screwed to keep it together but it does still run.
Loader Photos
Viewloader VLocity Jr with Virtue Chip: $20
Stock chip is included.
Batteries were dead so there will not be any installed.
Loader Photos
(2-22-2022) Last marker finally sold. Everything is gone now.
I just re-created my account the other day but I have been on here since about 2012? I've only purchased previously and have never sold anything.
If you need any additional info or pictures on anything let me know and I will see what I can do.
So I have a few guns that I'm ready to part ways with (sorta). They mostly hang on the wall above the fireplace and have not gotten much attention lately.
I'm not the most current on pricing but I'll list the prices I feel comfortable selling at. If nothing moves, I might give Ebay a shot as well.
Otherwise their spots on the wall might remain occupied 😁.
SOLD ~~~~ Shocker Sport Turbo - $250 ~~~~ SOLD
Marker powers on and solenoids click, it worked the last time it was aired up which has been much to long so it probably over due for some new orings.
By no means is this marker pristine. There is marring on the front and rear caps as well as the Bolt assembly knob.
It has the aluminum bolt so there is also wear in the breach.
On off switch installed in hand grip. A Blue LED light was added to the rear of the gun (hole drilled in tray) that turns on with the power.
NDZ Trigger
Nummech Vertical Reg Adapter
Evil Detonator Reg
DS Board with Select Fire switch added.
Smart Parts On/Off ASA
Freak Barrel with Stainless .689 insert
Spare/Extras included:
Max Flow Reg with various fittings included to mount vertically or horizontally below barrel
Front Grip adapter
Evil "The Part"
Stock Trigger
Large Pressure gauge that came with gun
Spare Elbow
Shocktech drop forward
Duckbill ASA
Phat On/Off ASA
Dye Boomstick (Not Pictured and I don't know the bore size, but most paint would roll out of it so it's definitely a larger bore)
More Photos
SOLD ~~~~ICD Naughty Dog FS7 - $250 ~~~~ SOLD
Powers on and solenoid clicks, worked the last time I used/tested it.
Breach is clean.
CP Blade Trigger
JDS LPR
NDZ On/Off ASA
Snatch Grip bolt assembly pin
Green led eyes.
Stock Barrel
Stock Reg
Predator Lite board
Spare/Extras included:
Proto Gun Case
Stock ICD Grip
Stock ICD On/Off ASA w/ ICD gauge
Stock LPR (has significant marks and may be missing parts, came with gun this way when I got it)
Stock trigger
Stock bolt assembly pin.
More Photos
SOLD ~~~~ Infinity Legend - $250 ~~~~ SOLD
Powers on, solenoid clicks. Battery was dead so there will not be one included but it worked the last time it was used.
There is some wear on the bottom of the breach and tip of the barrel, otherwise it's pretty clean.
The power wires broke from the harness connector so they have been soldered directly to the board.
Rhino Spring
Infinity Soft Tip Bolt
Infinity ASA
CP Reg
Stock WAS board? It is NOT the Tadao board
Spare/Extras Included:
Proto gun case
Stock Bolt and Spring
Prototype "Rutley Rammer"s with bolts. They were custom made by a guy on PBnation and I tested them out. Parts were made much lighter to run lower pressures and they did work. I just liked the quick pull pin bolts better.
Prototype reg extension air chamber? Also from "Rutley". I don't remember exactly what the claim was for this part, never used it.
More Photos
SOLD ~~~~ ICD Promaster - $275 ~~~~ SOLD
Powers on, solenoid clicks. Worked the last time I used/tested it.
There is some wear at the bottom of the breach. Scratches on barrel.
I don't want to part it out, but I won't be upset if someone else does.
CP Blade trigger
AKA SCM III LPR
Crammer
Kila Eye Covers and magnetic detents
Kila drive board
Dye Hyper 2 Reg
CCM Low profile feedneck
NDZ On/Off ASA
CP 2 piece barrerl (.689 & .693 backs)
Shocktech bolt & Pin (Jewel on pin has fallen off)
Pink LED eyes
Pink LED power indicator light
Spare/Extras Included:
Proto gun case
Stock Barrel
Stock LPR (has marks on screw cap)
Stock Reg
Stock Trigger
Stock Eye Covers and detents
Ebay Valve (I had issues with it leaking)
Stock rammer with lightened delrin hammer (I did scratch up the shaft when installing this)
Stock hammer
Stock board (4th dip switch is broke, but it's position is not changed much for most settings.)
After market clamping feedneck
ICD Parts kit (barbs, seals and a few o-rings)
O-ring rebuild kit
Stock, Shocktech and ebay bolt pins (do not work with the crammer)
QEV (unsure why I have this one in my parts box)
Stock LPR spring and other Spyder springs (I think)
Manual and Parts sheet.
More Photos
Extras
I have two Loaders I can ADD with any marker if anyone would want them. (first come first serve)
I will only add them and not sell individually.
Viewloader Evolution: FREE if you want it
It has been Glued and Screwed to keep it together but it does still run.
Loader Photos
Viewloader VLocity Jr with Virtue Chip: $20
Stock chip is included.
Batteries were dead so there will not be any installed.
Loader Photos
(2-22-2022) Last marker finally sold. Everything is gone now.
Comment