Yes you read that right. Running into a funding problem for supergame so seeing if any of you want to finish up this nearly done project that's been sitting on my shelf for at least 6 months.
Ariakron combat pistol (ACP) matted to a piranha e force frame. Semi auto, 3 round burst and a glorious 2 seconds of full auto bliss before the magazine runs dry.
Selling this as is, I just put a 12g in it, has a slight face seal leak (could have just been how I put it in) , holds air otherwise but won't put the air down the barrel. Frame works fine, hammer slides forward when released. has to be something with the valve I just don't have time to pull it out and figure it out right now. It did fire when I originally put it together about 6 months ago
Also modified it to work with a piranha quick strip pin. As I found out in my test fire, the original pin was too small and allowed the back block to slide under it when it went full auto. This in turn meant that the back block comes flying out of the marker at mach 5 and tries to murder you. I figured that was a problem worth addressing. Bigger pin, no death by modifications.
Cut the body to make changing 12g easier. That one worked out great. About the only thing there that might be useful is to tinker with the front knob to make it easier to grab
Clear grips, I had to cut and trim them to make them work. Worked out ok, not great but it is a cool look I think
Besides sorting out the valve I planned to paint it and that was about all. Choose your own colors this way
$65 shipped
Willing to ship to Canada but might be an extra $5 or $10 to cover the international shipping
Sent from my motorola edge 2024 using Tapatalk
Ariakron combat pistol (ACP) matted to a piranha e force frame. Semi auto, 3 round burst and a glorious 2 seconds of full auto bliss before the magazine runs dry.
Selling this as is, I just put a 12g in it, has a slight face seal leak (could have just been how I put it in) , holds air otherwise but won't put the air down the barrel. Frame works fine, hammer slides forward when released. has to be something with the valve I just don't have time to pull it out and figure it out right now. It did fire when I originally put it together about 6 months ago
Also modified it to work with a piranha quick strip pin. As I found out in my test fire, the original pin was too small and allowed the back block to slide under it when it went full auto. This in turn meant that the back block comes flying out of the marker at mach 5 and tries to murder you. I figured that was a problem worth addressing. Bigger pin, no death by modifications.
Cut the body to make changing 12g easier. That one worked out great. About the only thing there that might be useful is to tinker with the front knob to make it easier to grab
Clear grips, I had to cut and trim them to make them work. Worked out ok, not great but it is a cool look I think
Besides sorting out the valve I planned to paint it and that was about all. Choose your own colors this way
$65 shipped
Willing to ship to Canada but might be an extra $5 or $10 to cover the international shipping
Sent from my motorola edge 2024 using Tapatalk
Comment