Lots to cover here.
I assembled this Emag from parts bought from here, Ebay, and r/paintball because it was a dream of mine to own and field an Emag. Dream came true but I haven't played for over a year and this poor masterwork of engineering now just sits on it's mount in my room. I'm going to let someone else enjoy it as much as I have. I had always meant to have a little machining done to clean up the damage and get a fresh ano on it but life got in the way and I never got around to it.
- Dye Boomstick - Stainless @ 12"
- AGD ULE Body w/ CP collared feedneck
- Bare Level 10 XValve - tuned perfectly, never chopped a ball - previous owner stripped the ano off the valve and the retention nubbin doesn't catch in the rail but it has never given me any issues. Super stable valve w/ the RT On/Off
- New battery, ordered direct from ADG - two years old, holds charge with no issues. Stored with shut-off pin when not in use.
- New black Grip Frame, purchased from and tuned by BeardedWorks - fire select retainer is gone so the selector spins all the way around but it holds when set - Beta 1.8 firmware (latest, I'm told)
- Original Level 7 Classic Valve - came with the Emag, I never aired it up so it def needs new seals
- Original gold Grip Frame with CP asa - beat up but she's all there
- Original silver Powerfeed Body with original matching, gold ano aluminum twistlock barrel barrel (if you're hankering to use the powerfeed body, I have an assortment of twistlock barrels I can include as well)
- Charger with Wall Adapter - fully functioning. Plug and play with Auto-cutoff at full charge - no need to fool around with alligator clamps and potential explosions.
- Inception Design EZ Off "slaps" style ASA
Now to problems:
The gold bits shows some... physical wear. The previous owner was not particularly nice to the gold hardware and it shows. There are dents, dinks, drops, scratches, scuffs, and the trigger guard on the gold grip frame looks like someone actually filed some of it away. Or it broke off. I'm not entirely sure. It's seen some rough use but I bought them that way. It hasn't gotten any worse under my care but it hasn't gotten any better either. Like it says above, I'd meant to get the body bits machined and fresh ano'd but I missed that train. Hopefully, her new owner can get the work done for her that I had intended. I've tried to photograph the damage as best I can but there are smaller things cosmetically that I didn't get close-ups on. The serious stuff is all well documented in pics. It is missing the second name plate from the left side of the marker. Otherwise, functions like... new-ish. Mechanically/electronically, it works perfect. She just shows her age in some places.
I unfortunately cannot give a shooting video because all my tanks are out of hydro and since I won't be playing much anymore (or likely at all), I don't have plans on getting a new tank or re-hydroing the ones I have.
All this, direct to your door, for $1450.00 - Paypal G&S (fees included), Venmo, Cash, or Zelle - I'm open to reasonable offers, too.
No Trades - sorry (wife will murder me)
I'll leave this posted here, first. If I get no hits here, it will then go to r/paintballBST. Then to FBMarketplace. Then to Ebay. But really, I just need to sell this beast. I don't want to but I need to.
I assembled this Emag from parts bought from here, Ebay, and r/paintball because it was a dream of mine to own and field an Emag. Dream came true but I haven't played for over a year and this poor masterwork of engineering now just sits on it's mount in my room. I'm going to let someone else enjoy it as much as I have. I had always meant to have a little machining done to clean up the damage and get a fresh ano on it but life got in the way and I never got around to it.
- Dye Boomstick - Stainless @ 12"
- AGD ULE Body w/ CP collared feedneck
- Bare Level 10 XValve - tuned perfectly, never chopped a ball - previous owner stripped the ano off the valve and the retention nubbin doesn't catch in the rail but it has never given me any issues. Super stable valve w/ the RT On/Off
- New battery, ordered direct from ADG - two years old, holds charge with no issues. Stored with shut-off pin when not in use.
- New black Grip Frame, purchased from and tuned by BeardedWorks - fire select retainer is gone so the selector spins all the way around but it holds when set - Beta 1.8 firmware (latest, I'm told)
- Original Level 7 Classic Valve - came with the Emag, I never aired it up so it def needs new seals
- Original gold Grip Frame with CP asa - beat up but she's all there
- Original silver Powerfeed Body with original matching, gold ano aluminum twistlock barrel barrel (if you're hankering to use the powerfeed body, I have an assortment of twistlock barrels I can include as well)
- Charger with Wall Adapter - fully functioning. Plug and play with Auto-cutoff at full charge - no need to fool around with alligator clamps and potential explosions.
- Inception Design EZ Off "slaps" style ASA
Now to problems:
The gold bits shows some... physical wear. The previous owner was not particularly nice to the gold hardware and it shows. There are dents, dinks, drops, scratches, scuffs, and the trigger guard on the gold grip frame looks like someone actually filed some of it away. Or it broke off. I'm not entirely sure. It's seen some rough use but I bought them that way. It hasn't gotten any worse under my care but it hasn't gotten any better either. Like it says above, I'd meant to get the body bits machined and fresh ano'd but I missed that train. Hopefully, her new owner can get the work done for her that I had intended. I've tried to photograph the damage as best I can but there are smaller things cosmetically that I didn't get close-ups on. The serious stuff is all well documented in pics. It is missing the second name plate from the left side of the marker. Otherwise, functions like... new-ish. Mechanically/electronically, it works perfect. She just shows her age in some places.
I unfortunately cannot give a shooting video because all my tanks are out of hydro and since I won't be playing much anymore (or likely at all), I don't have plans on getting a new tank or re-hydroing the ones I have.
All this, direct to your door, for $1450.00 - Paypal G&S (fees included), Venmo, Cash, or Zelle - I'm open to reasonable offers, too.
No Trades - sorry (wife will murder me)
I'll leave this posted here, first. If I get no hits here, it will then go to r/paintballBST. Then to FBMarketplace. Then to Ebay. But really, I just need to sell this beast. I don't want to but I need to.
Comment