WGP Outkast E-Blade

[Reflex0283]

WGP Outkast E-Blade, I bought it in a lot over the summer, put it together with a small leak. Took it apart to clean it up and seriously messed up one of the solenoid screws, haven't had the time or motivation to order new ones or buy anything more for it. Soldered a 9v battery lead to it since the original contacts were missing. Does not come with the gauge. Both solenoids work and the board has no issues. Stock internals. Will come with some hardware from ACP

Can send more pics at request

$300 shipped obo

[Reflex0283]

Price drop: $260 shipped

[Blackmagic71]

Price drop: $260 shipped

Mighty tempting at that price.

Any pictures of the board battery modifications?

[Reflex0283]

I can grab some tomorrow

[Macdave06]

What's the issue with the solenoid? Just the mounting screw is stripped?

Sent from my Pixel 10 Pro using Tapatalk

[Reflex0283]

The solenoid leaks from somewhere, the screws are a little stripped and one of the heads are bent. I threaded them in the wrong way like an idiot and messed them up. The solenoid didn't leak before but does now, and the only thing that has changed is that I moved the gasket and stripped the screws. It may also just have too much LPR pressure.

[CavemaN]

Still available?

[Reflex0283]

Yessir

[Reflex0283]

Blackmagic71 here's a picture of the board, my soldering isn't the best in the world but it works

[Blackmagic71]

That looks like a really good fix to me. 👍

I’ve got a handful of eblade boards where the battery prongs are starting to tear off, I was working up the courage to solder them back together like stock, but I like this fix much better.

Where did you get the battery harness?

[Reflex0283]

Blackmagic71 I had one on hand and then couldn't find it and the iron was hot, so I just cut the harness off of my halo B lol. I'm sure you can find them on Amazon, I bought one from my local shop (hogans alley) for pretty cheap

[heit1_32]

You can buy the battery harness by itself for $7 from ANS gear: Kingman Spyder Battery Harness (WRH002)

Just pull the wires out of the terminal and you're ready to solder. This is how I do them. Those old battery terminals are trash, I love putting in the harnesses instead.

[Reflex0283]

Sold