Planet eclipse geo 3.5

[uncleted]

https://jumpshare.com/s/azn0GMgoOwRdBwCZMiYo#https://uploadnow.io/f/pHnkHcJ
Messed with the solenoid, got it to work but it is still puffing before it starts to rip, all i had is 3 year old paint and a broken halo to try it but i made a video. Would like to trade open to offers.

[The G-FOURce]

Have you tried tossing out the old battery and adding a brand new, name-brand battery?

[uncleted]

I havnt tried an energizer, I did put a brand new ac delco and a new rayovac in both batteries showed full on the screen. You think the battery could really make the difference? These were unopened batteries.

[RPP]

It is possible the 9V is the issue, but these solenoids are also known for crapping out. Its worth a try imo.

[The G-FOURce]

I’ll PM you…

[tyronejk]

I think those batteries should work fine. I'd also assume the solenoid is dead, which is unfortunate, since they're unobtanium.

[uncleted]

Well that sucks price lowered to $350 or Trade for a nice autococker, would also trade for an older ego or a Etha.

[uncleted]

$300?

[TinCan1154]

Mine sticks sometimes… I just went through this the other day and I was lucky my not so technical approach worked.

I replaced the battery with a new energizer, no air, no paint, turned marker on, turned eyes off and then kept pulling the trigger. 50 or so pulls in I could hear the solenoid start to click. Aired it up and it shot flawless.

These things need exercised on a regular basis. The 3.5 is my favorite shooter.

I’ve got a brand new solenoid when mine inevitably craps out. Was lucky to find it last year.

[TinCan1154]

Did it work or do I have to buy this thing cause I have a solenoid? I wish I liked green more.

[uncleted]

Check out the video, it worked but it still puffs right before it starts shooting ?

[TinCan1154]

Disassemble and clean. You’re close.

[uncleted]

I have taken the solenoid apart 3 times and cleaned it how I got it freed up was cutting the wires and shocking it with a 12 volt battery until the solenoid started clicking. Soldered it back together and then it worked with the 9v. But can’t seem to get the puffing to stop.

[TinCan1154]

Call PE and ask real nicely for a new noid. They may have some, but expect to pay.

[The G-FOURce]

And explain to them everything you've explained here and ask their advice on next steps. I’ve found them to be very customer friendly and willing to help.