I have a Strange Impulse lot, an A-Bomb Impulse lot, a stock Smart Parts Impulse lot, and a System X NME up for grabs. I won't be parting anything out. If you're interested, shoot me a message and I'll get you many more photos. Prices are firm; I will keep these long before you get relatively close to even beginning to talk me down. Markers/lots are sold as-is. Most of your questions can be answered below, so please respect both of our time by reviewing what I’ve already taken the time to write, first. To further clarify, if you don't want to pay the firm price, don't reach out to me. Don't waste my time, and I will not waste yours; if you do, I will reciprocate by ignoring you. However, if you have additional questions (beyond what this thread already explains), I’m happy to answer them.
A-Bomb Impulse lot - $625.00 shipped
The marker is in great condition, the noid clicks, and the eyes work. I'll rebuild it and add macroline before shipping, but I don't have the means to test for air leaks. It comes with everything you see in the PFA photos (WAS board, Supafly bolt, and stock internals). I can’t find the XL back for the carbon fiber tip, so know that you will need one in order to use the carbon fiber tip; another gloss blue tip is included to use with the matching Freak back. The only other issue is that the head of both plastic screws that secure a daughter board to the body broke off at some point, so you’ll have to extract them if you want to use an upper/daughter+lower board combo in it (the WAS board consists of one main board and is not affected by this). The rest of the lot includes:
1. NDZ Rip Valve
2. NDZ Slik Shot assembly /w NDZ hammer, and Rat Hole hammer
3. Wave trigger for iFrame (has to me modded slightly because it was designed for a different version)
4. Two CCM aluminum air fittings in dust gray
5. Matching dust blue Max-Flo cap
6. Extra set of stock detents
7. .693 Freak XL insert (black)
8. Full size white delrin bolt (the rare kind that creates backspin)
9. Full size blue delrin bolt
10. Original matching duck bill ASA
11. One spare solenoid, gasket, and screws
12. Pressure relief valve
Strange Impulse lot - $750.00 shipped
I dug up a very nice Strange kit/lot for sale. I already have a maxed Strange and I want to release this one back into the wild for someone else to enjoy. As per usual, I put all of my favorite parts in the kit so that after anno I would be able to build it a number of differing ways (while still matching); obviously this one never made it to anno, so you will receive a maxed out Impulse kit/lot that is ready to be sent off to be re-annodized (if you choose to do so). Everything is in phenomenal condition, aside from the damaged WAS eye cover, some wear on a max-flo, and anno fading on the extra max-Flo cap (all explained below). Even the OTB frame and grips look and feel brand new. The Strange body has two very, very, very small areas of damage, both of which will disappear with proper prepping and anno. If you don't plan to ship it off for anno, I will rebuild it and assemble it in whichever way you prefer between all of the parts, albeit that I don't have a way to test for leaks.
Along with everything that already comes installed on the marker as shown in the photo (stock internals, Samurai trigger, Supafly bolt, Empire feedneck, and no board installed), the lot includes:
1. WAS board, eye, and eye cover (eye cover is damaged/scratched on its surface) - all parts are working
2. Stock trigger frame
3. IFrame
4. OTB frame
5. NDZ RIP valve
6. NDZ Slik Shot assembly with Rat Hole hammer
7. Two stock trays
8. Extra stock NON-vision board with damaged micro switch; the tabs that hold the switch lever are damaged but it works otherwise, so repair or microswitch replacement is required (replacement is very easy to do) - I intend to repair this myself, and will update if I get to it
9. New daughter board
10. Two tray board buttons
11. Three stock vision eye covers (only one has a jewel) and one custom bare aluminum eye cover (which will fit the WAS board eye and wiring)
12. One solenoid, gasket, and screws (currently installed on the marker)
13. One spare solenoid
14. IFrame wave trigger (requires minor modding to fit because it’s designed for a different version)
15. Fang trigger
16. Samurai trigger (a second one already comes installed on the marker)
17. Blade trigger
18. Two trigger pins and C-clips
19. Snatch grip
20. Four sets of detents - one hybrid set, two NDZ sets, and one custom (bare aluminum) set that takes neoprene/rubber inserts like the ones for Spyders or Timmys
21. Two tape worms - each with nipple, hose, and locking sleeve
22. Empire super low rise feedneck (the shortest feedneck you’ll find)
23. Spare stock valve and spring (in addition to what is already installed on the marker)
24. Spare stock ram and hammer (in addition to what is already installed on the marker)
25. Additional (heavier) hammer
26. Jack hammer II LPR + front cap
27. Smart parts micro LPR + front cap
28. Evil respirator
29. Two max-Flo regs (one has dings around the area where the macroline fitting was installed)
30. Extra max Flo reg cap; the anno is very worn, but it’s superficial fading and the cap will successfully and effectively take a re-anno job
31. Bob Long Torpedo reg clone
32. Stock vertical ASA adapter with gauge
33. NDZ vertical ASA adapter
34. NDZ 45 degree ASA adapter
35. Full size white derin bolt (the rare kind that creates backspin)
36. Full size Hybrid bolt with three interchangeable delrin tips; one of which mimics the rare Impulse bolt that creates backspin
37. Two Strange delrin bolts
38. Six bolt pins (random assortment between stock, Freak Factory, etc.)
Stock Blue and Chrome Impulse lot - $325.00 shipped
This marker is in great condition. The noid clicks. It comes with everything in its PFA photo, which includes a stock NON-vision board (and an eye cover even though it does not have an eye or daughter board installed), a full size white delrin bolt, and stock internals. It also comes with these additional parts:
1. Three solenoids, gaskets, and screws (in addition to the one that comes installed)
2. Low pressure noid core
3. New OTP barrel system with a dust black barrel tip, a gloss black barrel tip, and five backs
4. Two vision eye covers
5. Vertical ASA adapter + pressure relief valve + gauge
6. Bare aluminum tray (requires polishing again)
7. Two gloss black trays (one with on/off button and one without)
8. Stock trigger frame
9. Three stock triggers
10. Two dwell board buttons + three button inserts (board buttons currently have micro screws installed as they were used to cover unused slots on a board tray)
11. Button pad for amber boards
12. Two sliding on/off buttons for amber boards
13. A newer eye in good condition, but the sensor came loose over time and requires repair/soldering
14. An eye with a ribbon cable that is not salvageable, but the eye sensor itself, is.
15. A daughter board with loose eye input (needs to be soldered back on) - I intend to repair this myself, and will update if I get to it
16. Two sets of stock detents
17. Two front caps that are drilled for an LPR (one in gloss black and one in dust gray), including screws to plug the LPR holes/threads
18. One glass black front cap that is not drilled for an LPR
19. Full size Hybrid bolt with three interchangeable delrin tips; one of which mimics the rare Impulse bolt that creates backspin
20. Full size blue delrin bolt
21. Full size black delrin bolt
22. Full size white delrin bolt
23. Evil bolt
24. Mid-size delrin bolt (I believe it is an AIM bolt)
25. White Supafly bolt
26. Black Strange delrin bolt + bolt pin
27. Three stock bolts
28. Four additional bolt pins
29. Chrome (non-adjustable) feedneck
30. Bare under-mount Max-flo body and internals
31. Vertical Max-flo body (without upper threading assembly, locking collar, or cap)
32. Extra stock valve and spring
33. Extra stock ram and hammer (with chrome back plate)
34. Three filters for tapeworm/solenoid inner channel
35. Chrome on/off
36. Gloss black 32° on/off
37. New bare rail
38. Bob long torpedo reg clone
39. Bare aluminum grips for .45 frame (can be polished or anno’d)
40. Black grips (appear to be sticky grips without jewels)
41. One half blocked stock Impulse body that is drilled for break beam eyes
42. Three stock Impulse bodies (one has a stock valve installed)
43. Three drop forwards
I forgot to add photos of the following, so I will provide them if you're interested:
44. Gen 1 undermount Max-Flo
45. Three New short shank 0-300 PSI gauges
46. Two used short shank 0-600 PSI gauges
47. Gloss black front cap
48. Gloss blue twist-locking feedneck
49. Gloss black twist-locking feedneck
System X NME - $300.00 shipped
I bought this brand new as a disassembled lot from the gentleman that ended up with the leftover System X stock. I assembled 99.9% of it; the eye covers (along with some spare parts) are in a terminal tackle box; the lot was originally missing the screws to secure the eye covers, but I picked a pair up to send with the marker. I'm drowning in so many projects that I just never got around to shooting it. The eyes work. The noid clicks. It has not been tested for leaks, but is literally a brand new marker, with brand new parts. I'll add fittings and macroline before it gets shipped out, as well.
A-Bomb Impulse lot - $625.00 shipped
The marker is in great condition, the noid clicks, and the eyes work. I'll rebuild it and add macroline before shipping, but I don't have the means to test for air leaks. It comes with everything you see in the PFA photos (WAS board, Supafly bolt, and stock internals). I can’t find the XL back for the carbon fiber tip, so know that you will need one in order to use the carbon fiber tip; another gloss blue tip is included to use with the matching Freak back. The only other issue is that the head of both plastic screws that secure a daughter board to the body broke off at some point, so you’ll have to extract them if you want to use an upper/daughter+lower board combo in it (the WAS board consists of one main board and is not affected by this). The rest of the lot includes:
1. NDZ Rip Valve
2. NDZ Slik Shot assembly /w NDZ hammer, and Rat Hole hammer
3. Wave trigger for iFrame (has to me modded slightly because it was designed for a different version)
4. Two CCM aluminum air fittings in dust gray
5. Matching dust blue Max-Flo cap
6. Extra set of stock detents
7. .693 Freak XL insert (black)
8. Full size white delrin bolt (the rare kind that creates backspin)
9. Full size blue delrin bolt
10. Original matching duck bill ASA
11. One spare solenoid, gasket, and screws
12. Pressure relief valve
Strange Impulse lot - $750.00 shipped
I dug up a very nice Strange kit/lot for sale. I already have a maxed Strange and I want to release this one back into the wild for someone else to enjoy. As per usual, I put all of my favorite parts in the kit so that after anno I would be able to build it a number of differing ways (while still matching); obviously this one never made it to anno, so you will receive a maxed out Impulse kit/lot that is ready to be sent off to be re-annodized (if you choose to do so). Everything is in phenomenal condition, aside from the damaged WAS eye cover, some wear on a max-flo, and anno fading on the extra max-Flo cap (all explained below). Even the OTB frame and grips look and feel brand new. The Strange body has two very, very, very small areas of damage, both of which will disappear with proper prepping and anno. If you don't plan to ship it off for anno, I will rebuild it and assemble it in whichever way you prefer between all of the parts, albeit that I don't have a way to test for leaks.
Along with everything that already comes installed on the marker as shown in the photo (stock internals, Samurai trigger, Supafly bolt, Empire feedneck, and no board installed), the lot includes:
1. WAS board, eye, and eye cover (eye cover is damaged/scratched on its surface) - all parts are working
2. Stock trigger frame
3. IFrame
4. OTB frame
5. NDZ RIP valve
6. NDZ Slik Shot assembly with Rat Hole hammer
7. Two stock trays
8. Extra stock NON-vision board with damaged micro switch; the tabs that hold the switch lever are damaged but it works otherwise, so repair or microswitch replacement is required (replacement is very easy to do) - I intend to repair this myself, and will update if I get to it
9. New daughter board
10. Two tray board buttons
11. Three stock vision eye covers (only one has a jewel) and one custom bare aluminum eye cover (which will fit the WAS board eye and wiring)
12. One solenoid, gasket, and screws (currently installed on the marker)
13. One spare solenoid
14. IFrame wave trigger (requires minor modding to fit because it’s designed for a different version)
15. Fang trigger
16. Samurai trigger (a second one already comes installed on the marker)
17. Blade trigger
18. Two trigger pins and C-clips
19. Snatch grip
20. Four sets of detents - one hybrid set, two NDZ sets, and one custom (bare aluminum) set that takes neoprene/rubber inserts like the ones for Spyders or Timmys
21. Two tape worms - each with nipple, hose, and locking sleeve
22. Empire super low rise feedneck (the shortest feedneck you’ll find)
23. Spare stock valve and spring (in addition to what is already installed on the marker)
24. Spare stock ram and hammer (in addition to what is already installed on the marker)
25. Additional (heavier) hammer
26. Jack hammer II LPR + front cap
27. Smart parts micro LPR + front cap
28. Evil respirator
29. Two max-Flo regs (one has dings around the area where the macroline fitting was installed)
30. Extra max Flo reg cap; the anno is very worn, but it’s superficial fading and the cap will successfully and effectively take a re-anno job
31. Bob Long Torpedo reg clone
32. Stock vertical ASA adapter with gauge
33. NDZ vertical ASA adapter
34. NDZ 45 degree ASA adapter
35. Full size white derin bolt (the rare kind that creates backspin)
36. Full size Hybrid bolt with three interchangeable delrin tips; one of which mimics the rare Impulse bolt that creates backspin
37. Two Strange delrin bolts
38. Six bolt pins (random assortment between stock, Freak Factory, etc.)
Stock Blue and Chrome Impulse lot - $325.00 shipped
This marker is in great condition. The noid clicks. It comes with everything in its PFA photo, which includes a stock NON-vision board (and an eye cover even though it does not have an eye or daughter board installed), a full size white delrin bolt, and stock internals. It also comes with these additional parts:
1. Three solenoids, gaskets, and screws (in addition to the one that comes installed)
2. Low pressure noid core
3. New OTP barrel system with a dust black barrel tip, a gloss black barrel tip, and five backs
4. Two vision eye covers
5. Vertical ASA adapter + pressure relief valve + gauge
6. Bare aluminum tray (requires polishing again)
7. Two gloss black trays (one with on/off button and one without)
8. Stock trigger frame
9. Three stock triggers
10. Two dwell board buttons + three button inserts (board buttons currently have micro screws installed as they were used to cover unused slots on a board tray)
11. Button pad for amber boards
12. Two sliding on/off buttons for amber boards
13. A newer eye in good condition, but the sensor came loose over time and requires repair/soldering
14. An eye with a ribbon cable that is not salvageable, but the eye sensor itself, is.
15. A daughter board with loose eye input (needs to be soldered back on) - I intend to repair this myself, and will update if I get to it
16. Two sets of stock detents
17. Two front caps that are drilled for an LPR (one in gloss black and one in dust gray), including screws to plug the LPR holes/threads
18. One glass black front cap that is not drilled for an LPR
19. Full size Hybrid bolt with three interchangeable delrin tips; one of which mimics the rare Impulse bolt that creates backspin
20. Full size blue delrin bolt
21. Full size black delrin bolt
22. Full size white delrin bolt
23. Evil bolt
24. Mid-size delrin bolt (I believe it is an AIM bolt)
25. White Supafly bolt
26. Black Strange delrin bolt + bolt pin
27. Three stock bolts
28. Four additional bolt pins
29. Chrome (non-adjustable) feedneck
30. Bare under-mount Max-flo body and internals
31. Vertical Max-flo body (without upper threading assembly, locking collar, or cap)
32. Extra stock valve and spring
33. Extra stock ram and hammer (with chrome back plate)
34. Three filters for tapeworm/solenoid inner channel
35. Chrome on/off
36. Gloss black 32° on/off
37. New bare rail
38. Bob long torpedo reg clone
39. Bare aluminum grips for .45 frame (can be polished or anno’d)
40. Black grips (appear to be sticky grips without jewels)
41. One half blocked stock Impulse body that is drilled for break beam eyes
42. Three stock Impulse bodies (one has a stock valve installed)
43. Three drop forwards
I forgot to add photos of the following, so I will provide them if you're interested:
44. Gen 1 undermount Max-Flo
45. Three New short shank 0-300 PSI gauges
46. Two used short shank 0-600 PSI gauges
47. Gloss black front cap
48. Gloss blue twist-locking feedneck
49. Gloss black twist-locking feedneck
System X NME - $300.00 shipped
I bought this brand new as a disassembled lot from the gentleman that ended up with the leftover System X stock. I assembled 99.9% of it; the eye covers (along with some spare parts) are in a terminal tackle box; the lot was originally missing the screws to secure the eye covers, but I picked a pair up to send with the marker. I'm drowning in so many projects that I just never got around to shooting it. The eyes work. The noid clicks. It has not been tested for leaks, but is literally a brand new marker, with brand new parts. I'll add fittings and macroline before it gets shipped out, as well.
Comment