I have a pair of infinity legends, both are working with no leaks and are shooting reballs in my apartment at ~255FPS. Both are well used and may need additional tinkering to get them how you would like. Prices are shipped in the U.S., I can provide more pictures at request.
Black Legend $475 Shipped
Cosmetically the better shape of the two, with much less breech wear. This one was a little quirky and would not cycle fully until I swapped in a rhino spring. Current settings are 250psi and 14.5ms dwell. The grips are cracked but hold together because of the smoke colored vinyl underneath them.
- Unmarked Proto 2-piece barrel
- Gen 2 CP HPR
- CP on/off ASA
- Gen 2 ram
- Redz Feedneck Clamp
- WAS board
- Rhino spring installed
- Stock spring included
Silver Legend $400 Shipped
Cosmetically more worn than the black one, but this marker has a brand new wiring harness and eyes from Glenn. I had to re-solder the solenoid leads onto this marker, it is not pretty but gets the job done. As far as I know this one is on the default board settings and the detonator is set around 220psi. Has the stock spring installed but will also come with a rhino spring if you want to play with things.
- Evil Detonator HPR
- CP .685 1-piece barrel
- CP ASA
- New Eyes and Wiring Harness
- Gen 1 ram
- WAS board
- Stock spring installed
- Rhino spring included
Black Legend $475 Shipped
Cosmetically the better shape of the two, with much less breech wear. This one was a little quirky and would not cycle fully until I swapped in a rhino spring. Current settings are 250psi and 14.5ms dwell. The grips are cracked but hold together because of the smoke colored vinyl underneath them.
- Unmarked Proto 2-piece barrel
- Gen 2 CP HPR
- CP on/off ASA
- Gen 2 ram
- Redz Feedneck Clamp
- WAS board
- Rhino spring installed
- Stock spring included
Silver Legend $400 Shipped
Cosmetically more worn than the black one, but this marker has a brand new wiring harness and eyes from Glenn. I had to re-solder the solenoid leads onto this marker, it is not pretty but gets the job done. As far as I know this one is on the default board settings and the detonator is set around 220psi. Has the stock spring installed but will also come with a rhino spring if you want to play with things.
- Evil Detonator HPR
- CP .685 1-piece barrel
- CP ASA
- New Eyes and Wiring Harness
- Gen 1 ram
- WAS board
- Stock spring installed
- Rhino spring included
Comment