I had a wild idea a while back, and here is the result. I wanted to make a mag-fed Stingray, which I mostly did. The prototype is visible on top. This was done with a dremel and a DMag mag well not so elegantly mashed onto a stingray 2.
There are the makings of 2-4 working stingrays. The two complete ones (middle) cycled on air the last time I checked.
The two on the bottom will need some work. One missing internals other missing barrel (extra parts included).
the prototype worked, but itβs been a long time, and a full cleaning and rebuild will be needed.
Remora Spyder to stingray adapter included. I had assembled some of the parts for a second prototype (extra barrel, sites).
The stock is from a real M16 and the fore grip is AR style. The valve was tapped for quick disconnect.
seven D mags included.
if you like messing around with stingrays and/or you fancy a weird mag-fed blowback, this would be for you.
whole package ships together.
$99 plus shipping.
Thanks!
There are the makings of 2-4 working stingrays. The two complete ones (middle) cycled on air the last time I checked.
The two on the bottom will need some work. One missing internals other missing barrel (extra parts included).
the prototype worked, but itβs been a long time, and a full cleaning and rebuild will be needed.
Remora Spyder to stingray adapter included. I had assembled some of the parts for a second prototype (extra barrel, sites).
The stock is from a real M16 and the fore grip is AR style. The valve was tapped for quick disconnect.
seven D mags included.
if you like messing around with stingrays and/or you fancy a weird mag-fed blowback, this would be for you.
whole package ships together.
$99 plus shipping.
Thanks!
Attached Files
Comment