Got a few to move along to new homes.
Prostock SOLD 03/18/22
First up is a 2k5 prostock. I had a matched pair of Superstock and Prostock, both new to me. This is the last one left of all my 'cockers.
Has a POPS asa, Lapco feedneck. Original black magic reg got changed to an Empire reg with gauge. Cocking rod is the type that has the hex on it so you can adjust velocity without an extra wrench.
Been a true workhorse, though its sibling got a lions share of the work, and I just play with my CS or pump more.
This one has followed my standard autococker rule: I do not try to tune it, I pay someone to do that. Last time was about 5 years back by Rick at TC Paintball.
Things I live with:
WGP beavertail has a hole through it near the dovetail(a bad idea in the long past)
Cocking rod likes to back out. I just keep tightening it in while playing. It's been a habit.
Usual macro leak until some shots get through to fully seat line.
Just played with last Sunday, and then cleaned up, to ensure function before turning it out
Has J&J barrel, original unused sock, extra 3 way barbs, top hats, clear line, and o-rings.
$385 Paypal shipped in the US.
Price drop
Next is a pair of Tippmann 98's.
Got a nostalgia kick again, and for some reason I decided to replicate a 98 I had at least 3 times over.
First 98 has the Response trigger, double trigger and Tippmann expansion chamber. Changed out all the springs and O-rings with a Tippmann kit and lightly smoothed up the internals(3M 7445/7448 pads).
Got the Super R/T parts and lines installed. The extra cyclone fitting and original parts included.
Second 98 is a plain workhorse intended as a loaner as I tired of loaning other stuff. Got the same light smoothing and rings and springs.
Extra parts shown included, including the brand new red aluminum powertube and delrin bolt.
SOLD via the 'Bay The pair goes together for $160 shipped in the US or OBO.
Looking to simplify my life in markers-so not a lot of trades are on my list.
Pretty firm on the prostock for the time being, but OBO on the 98's.
Doubtful the right T2 or 6.5 would come along-but I'll put it in.
EMF100 or a mech eclipse gun.
My missing unicorn in its stock configuration-an '06 Black magic in dark purple fade to silver with a matching dark karni frame and scenario dreams T-Board(if you have it...)
I'm certainly not opposed to adding appropriately...
Prostock SOLD 03/18/22
First up is a 2k5 prostock. I had a matched pair of Superstock and Prostock, both new to me. This is the last one left of all my 'cockers.
Has a POPS asa, Lapco feedneck. Original black magic reg got changed to an Empire reg with gauge. Cocking rod is the type that has the hex on it so you can adjust velocity without an extra wrench.
Been a true workhorse, though its sibling got a lions share of the work, and I just play with my CS or pump more.
This one has followed my standard autococker rule: I do not try to tune it, I pay someone to do that. Last time was about 5 years back by Rick at TC Paintball.
Things I live with:
WGP beavertail has a hole through it near the dovetail(a bad idea in the long past)
Cocking rod likes to back out. I just keep tightening it in while playing. It's been a habit.
Usual macro leak until some shots get through to fully seat line.
Just played with last Sunday, and then cleaned up, to ensure function before turning it out
Has J&J barrel, original unused sock, extra 3 way barbs, top hats, clear line, and o-rings.
$385 Paypal shipped in the US.
Price drop
Next is a pair of Tippmann 98's.
Got a nostalgia kick again, and for some reason I decided to replicate a 98 I had at least 3 times over.
First 98 has the Response trigger, double trigger and Tippmann expansion chamber. Changed out all the springs and O-rings with a Tippmann kit and lightly smoothed up the internals(3M 7445/7448 pads).
Got the Super R/T parts and lines installed. The extra cyclone fitting and original parts included.
Second 98 is a plain workhorse intended as a loaner as I tired of loaning other stuff. Got the same light smoothing and rings and springs.
Extra parts shown included, including the brand new red aluminum powertube and delrin bolt.
SOLD via the 'Bay The pair goes together for $160 shipped in the US or OBO.
Looking to simplify my life in markers-so not a lot of trades are on my list.
Pretty firm on the prostock for the time being, but OBO on the 98's.
Doubtful the right T2 or 6.5 would come along-but I'll put it in.
EMF100 or a mech eclipse gun.
My missing unicorn in its stock configuration-an '06 Black magic in dark purple fade to silver with a matching dark karni frame and scenario dreams T-Board(if you have it...)
I'm certainly not opposed to adding appropriately...
Comment