SOLD
KAPP Reflex Autococker -SOLD $750 Shipped
Undrilled 🤗 and Underrated
Keeper condition, anodizing is clean, some light wear on the back block. Barrel back has marks on the chrome back, looks like someone took pliers to it. clearly they didn't have soft jaws.
It was my intention to get a matching kapp frontend and have the marker sent for anodizing, but I had a hard time collecting a matching set I liked. You can faintly see some of the tool marks from the machining process not tumbled or polished out. I only saw this on the prototype body in bacci's video _ I would like to ask Dirk about it since he milled the body.. maybe it was an early one?
Shocktech: pneumatics, HPR, bolt+pin
WGP asa _ these don't like ball valves fyi
CCM feedneck
Kapp Stainless valve, Kapp Lightened hammer_ I had never seen one before, it's cool looking.
I bought some new kapp jewels from bacci, they need to be located in my boxes and included.
Will come with two kapp detents, that need to be cleaned so the ball moves freely. once is chrome one is blue.
Will also ship with pneumatic hose. The white hose is fancy _ the one is just a hair short, it holds but if you go bunker diving...
videos for your historical entertainment:
https://youtu.be/3KcMak5Q8_I?t=351
https://youtu.be/yUUp8KlnctI
fairly consistent shooter with 15yr old reball -
Shot#2 different brand reball that was mixed in
shot#6 roll forward
hand loaded single shot, batteries were dead in the rotor
KAPP Reflex Autococker -SOLD $750 Shipped
Undrilled 🤗 and Underrated
Keeper condition, anodizing is clean, some light wear on the back block. Barrel back has marks on the chrome back, looks like someone took pliers to it. clearly they didn't have soft jaws.
It was my intention to get a matching kapp frontend and have the marker sent for anodizing, but I had a hard time collecting a matching set I liked. You can faintly see some of the tool marks from the machining process not tumbled or polished out. I only saw this on the prototype body in bacci's video _ I would like to ask Dirk about it since he milled the body.. maybe it was an early one?
Shocktech: pneumatics, HPR, bolt+pin
WGP asa _ these don't like ball valves fyi
CCM feedneck
Kapp Stainless valve, Kapp Lightened hammer_ I had never seen one before, it's cool looking.
I bought some new kapp jewels from bacci, they need to be located in my boxes and included.
Will come with two kapp detents, that need to be cleaned so the ball moves freely. once is chrome one is blue.
Will also ship with pneumatic hose. The white hose is fancy _ the one is just a hair short, it holds but if you go bunker diving...
videos for your historical entertainment:
https://youtu.be/3KcMak5Q8_I?t=351
https://youtu.be/yUUp8KlnctI
fairly consistent shooter with 15yr old reball -
Shot#2 different brand reball that was mixed in
shot#6 roll forward
hand loaded single shot, batteries were dead in the rotor
Comment