SOLD
$400 shipped and PayPaled. US only. No parting. No trades.
Marker
-“E-Mag” labeled RT valve
-Pot metal frame with wood grips. Safety cross bolt included. No safety spring, ball, or set screw.
-Level 10. No spares, no foamie, and no leaks. Functions as it should.
-ULT. No spares. Needs tiny middle on/off o-ring. Functions even with existing leak.
-Minimag body is pump milled.
-12" J&J Ceramic
-16" Smart Parts All American
-AGD back bottle ASA (extra part)
Hyperframe
-Safety cross bolt included. No safety spring or ball.
-Left side grip panel (without window) is 3D printed replacement. Not a perfect OEM match, but functional.
-Functions and resets with ULT, even with the on/off leak from tiny middle o-ring.
-13 bps semi and 10 bps hyper modes, counter, and timer. No full auto or burst modes.
-Solenoid dwell/force can be adjusted in "setup mode". To enter setup mode, hold power button. Before unit powers on, press and hold other button, while still holding power button. Takes coordination and timing to enter setup mode, but it works.
-Able to adjust solenoid dwell/force to work with RT on/off (not included) or ULT (included).
Pump Kit
-3D printed "pump milled" rail and pump kit
-Wave spring (+1 extra), trimmed bumper, trimmed bolt spring (to prevent semi-auto), and separate rail bushing and twist-lock pin assembly from those in the aluminum rail
$400 shipped and PayPaled. US only. No parting. No trades.
Marker
-“E-Mag” labeled RT valve
-Pot metal frame with wood grips. Safety cross bolt included. No safety spring, ball, or set screw.
-Level 10. No spares, no foamie, and no leaks. Functions as it should.
-ULT. No spares. Needs tiny middle on/off o-ring. Functions even with existing leak.
-Minimag body is pump milled.
-12" J&J Ceramic
-16" Smart Parts All American
-AGD back bottle ASA (extra part)
Hyperframe
-Safety cross bolt included. No safety spring or ball.
-Left side grip panel (without window) is 3D printed replacement. Not a perfect OEM match, but functional.
-Functions and resets with ULT, even with the on/off leak from tiny middle o-ring.
-13 bps semi and 10 bps hyper modes, counter, and timer. No full auto or burst modes.
-Solenoid dwell/force can be adjusted in "setup mode". To enter setup mode, hold power button. Before unit powers on, press and hold other button, while still holding power button. Takes coordination and timing to enter setup mode, but it works.
-Able to adjust solenoid dwell/force to work with RT on/off (not included) or ULT (included).
Pump Kit
-3D printed "pump milled" rail and pump kit
-Wave spring (+1 extra), trimmed bumper, trimmed bolt spring (to prevent semi-auto), and separate rail bushing and twist-lock pin assembly from those in the aluminum rail
Comment