**** BOTH MAGS ARE SOLD****
Edit: $100 will be donated to help get DocsMachine to SuperGame once I’ve sold the both of these. Let’s get this man to the game!
68 Automag >>>$180 shipped TYD in CONUS<<<
-soft face L7 bolt (2 foamies left in the kit. New one installed and never seen paint. Installed using the method outlined by superman in the video below)
-Direct feed on the right
-stock matched valve body parts and back bottle adapter
-installed an ANS XFV (xtreme flow valve). Original included.
-stock unported 12” barrel w/new o-rings and plastic detent
-stock frame & trigger, working safety
-Lapco grips
-extra plastic detent, old bolt bumper, and teflon rings included
-cleaned, lubed, full rebuild (including main spring and bumper), and chrono’d to ~270-280fps
-she’s an old girl, so expect some dings, scratches, and spots of rust. I’d be happy to take extra photos upon request.
MiniMag >>>$270 shipped TYD in CONUS<<<
-hard face bolt
-power feed, hopper on right side
-ANS high flow Phase II rear valve housing
-13” gloss black spiral ported barrel (the straight “holes” are just milled dimples) w/new o-rings and plastic detent
-32 Degrees frame (from what I can tell it’s the same as the Dye frames, just a different badge) with textured rubber grips & DYE stainless drop forward and duckbill ASA.
-No safety switch - looks like a stock AGD safety should fit
-macroline with QD for easy disassembly
-cleaned, lubed, full rebuild including new main spring and bolt bumper
-extra plastic detent, old bolt bumper, and teflon o-rings
-nicks and scrapes common with a marker of this era. No leaks, chrono’d to ~270-280fps
I have an extra old spring available - it has a small amount of rust but otherwise seems serviceable. I’ll include it with the first person who buys a mag and asks for it 😝
Want to buy both? Let’s make a deal!
Edit: $100 will be donated to help get DocsMachine to SuperGame once I’ve sold the both of these. Let’s get this man to the game!
68 Automag >>>$180 shipped TYD in CONUS<<<
-soft face L7 bolt (2 foamies left in the kit. New one installed and never seen paint. Installed using the method outlined by superman in the video below)
-Direct feed on the right
-stock matched valve body parts and back bottle adapter
-installed an ANS XFV (xtreme flow valve). Original included.
-stock unported 12” barrel w/new o-rings and plastic detent
-stock frame & trigger, working safety
-Lapco grips
-extra plastic detent, old bolt bumper, and teflon rings included
-cleaned, lubed, full rebuild (including main spring and bumper), and chrono’d to ~270-280fps
-she’s an old girl, so expect some dings, scratches, and spots of rust. I’d be happy to take extra photos upon request.
MiniMag >>>$270 shipped TYD in CONUS<<<
-hard face bolt
-power feed, hopper on right side
-ANS high flow Phase II rear valve housing
-13” gloss black spiral ported barrel (the straight “holes” are just milled dimples) w/new o-rings and plastic detent
-32 Degrees frame (from what I can tell it’s the same as the Dye frames, just a different badge) with textured rubber grips & DYE stainless drop forward and duckbill ASA.
-No safety switch - looks like a stock AGD safety should fit
-macroline with QD for easy disassembly
-cleaned, lubed, full rebuild including new main spring and bolt bumper
-extra plastic detent, old bolt bumper, and teflon o-rings
-nicks and scrapes common with a marker of this era. No leaks, chrono’d to ~270-280fps
I have an extra old spring available - it has a small amount of rust but otherwise seems serviceable. I’ll include it with the first person who buys a mag and asks for it 😝
Want to buy both? Let’s make a deal!
Attached Files
Comment