Custom Ripper Autococker Dual Ram One Of A Kind

[keeptrying56]

Custom Ripper Autococker. Lots of custom milling by Angry Antle and dual ram front block. Anodizing done by ARC. Full Inception lower tube and Trident bolt. All parts are new. 1150 shipped

You have two options for IVGs and main springs. You can run her with a standard IVG and midget spring or use the custom IVG seen in the last pic and a normal length spring.

***Freak barrel insert not included.***

[OpusX]

Sooo one ram pumps the other returns? Hence the open air brass sintered air filters I assume?

[keeptrying56]

Yes sir. You can also plumb it a different way with T-barbs.

[Myrkul]

Only one LPR?

[Grendel]

Really shouldn't be needed the same volume of air is needed because he is using each ram for only one action.

[Myrkul]

I was thinking the main advantage of two rams was that the force needed to cock the marker back and compress the main spring would be greater then the force needed to pump the gun forward and load a ball, so you'd be able to decrease the pressure on the return stroke significantly and allow for some pretty insane levels of gentle paint handling.

[Ripper]

Yes sir. You can also plumb it a different way with T-barbs.

Assuming the 3 way is more or less the same design as other cockers, what's the benefit of having dual ram?

[jokers]

I swear I recently saw this same marker with pics and everything here or reddit about 75% sure it was for sale as well.

[keeptrying56]

I swear I recently saw this same marker with pics and everything here or reddit about 75% sure it was for sale as well.

That’s correct. Deleted the old post and started over with new pics. Slightly different IVG configuration currently.

[FastGas]

so this is effectively a midget? What will it shoot for FPS?

[keeptrying56]

so this is effectively a midget? What will it shoot for FPS?

With a standard IVG it's a midget. It's currently at 275 with proper bore match. I also have a cust IVG that will allow for a standard length main spring. You've got options.

[FastGas]

what does it look like with the custom IVG that allows for standard springs?

[keeptrying56]

what does it look like with the custom IVG that allows for standard springs?

[FastGas]

Very interesting

[Team13PB]

i am pretty certain that this gun is now mine, i got it disassembled with a broken filter cone, can anyone confirm the filter is standard 10-32 thread? i am likely replacing them with flat filters so i dont have to be real careful. such a cool config. the previous owner changed to really nice grip panels and it now has a black vert reg, but other than that it seems the same. it does have a short spring and shooting around 280

[latches109]

i am pretty certain that this gun is now mine, i got it disassembled with a broken filter cone, can anyone confirm the filter is standard 10-32 thread? i am likely replacing them with flat filters so i dont have to be real careful. such a cool config. the previous owner changed to really nice grip panels and it now has a black vert reg, but other than that it seems the same. it does have a short spring and shooting around 280

correct inception ram barbs are 10-32 threaded. you can see here to double check https://inceptiondesigns.com/LPR_RAM...p/IFP-1027.htm