Bill Macke LF Reverse autococker - $450 Shipped. GONE BABY GONE
Bill Macke worked for Constant Action Paintball in Austin Texas. He developed some of the earliest successful low pressure autocockers using his "Constant Flow" system. These used enlarged valve chambers, custom ported front blocks and large banjo bolts. They also featured enlarged air transfer ports. AKA bolts and valves were a common feature.
Bill also made a few reversed pneumatic autocockers, like this one.
This AC came with a WGP valve and hammer installed. It was replaced with the Inception valve (very similar to the AKA, I don't recall what hammer I used specifically but something aftermarket). The trigger is smooth and even. An excellent low pressure shooter.
There are some idiosyncrasies with this autococker. The milling is quite deep and exposes a little of the IVG threading on either side. The ASA seals with a flat seal between the HPR and body. Neither of these affect performance, but are certainly worth mentioning. The timing rod has a bend in it to accommodate the 3-way position. There are some marks here and there. This is a relatively rare and unique autococker and one that shoots great. I had initially intended to keep this one, but left feed just isn't for me.
Reg has Docfire's internals for the Gladiator, which I heartily recommend.
I'd look at trades, but not after anything particular at this moment.
Comment