Mech Ion + CP 1 piece barrel

[noclue119]

Mech Ion works great.
No leaks(has a slight hiss from the elbow)
Epiphany frame,
clippard qev
Shocktech superfly bolt spring detents
Clamping feedneck Shoots 285
$100 + shipping.

https://youtu.be/CPcdiv3Qkcc

[autococker04]

Cool setup, could you take a closeup picture of the trigger?

[noclue119]

it is warrior trigger that was cut and sanded to make it a single trigger

[autococker04]

Thanks, I’m going to think about this one for a little but I’ll likely message you soon.

[BrickHaus]

Do I really need 5? Lol so tempting, but I shouldnt. These are so much fun to shoot to anyone who doesnt know. Great gun for the price.

[noclue119]

I have 3 including this one. And they all work. No leaks.

[JeeperCreeper]

I have 5. 1 Virtue, 2 stock, and 2 mech. You kinda need that many when they are so unreliable sometimes.

[noclue119]

Mine works 100% of the time.

[noclue119]

Bump

[Bob_da_Splatman]

Was it a kit or did you mechanize it yourself?

[Psycho91]

Iv wondered how these shoot compared to enmeys

[JeeperCreeper]

I can practically walk the trigger on the one I have with a double trigger. Very short trigger pull, and very responsive. The only thing is the bolt doesnt go all the way back until the trigger is fully released

[Bob_da_Splatman]

Head and shoulders above, IMO! And maybe just due to the double trigger but the pull and action are usually quite snappy, at least in my TwoFatGuys mod kitted ones! Any that are utilizing the SMAV3 or like devices should be similar!

[noclue119]

It uses smav3 valve. It was done by a Mechnical engineer friend of mine. The pull is very short.
If I had to put this in gun terms, this would be more like a single stage cmc triggertrigger. No take up, crisp break and all within 1/8 of an inch

[Gradyfest]

I didn’t know you could make these mechanical! How?!? Google time.

[AirAssault]

I didn’t know you could make these mechanical! How?!? Google time.

https://stanchy.com/collections/mechanical-conversion-kits/products/mech-ion-kit

[noclue119]

I didn’t know you could make these mechanical! How?!? Google time.

SSc's kit is the same as 2fatguys' setup.
Just a few other comments.
First make sure you get a bolt with dual o ring in the tail, add a qev(not needed but really nice to have) and finally get some spring/magnetic detents.

Other than that, these shoots amazingly well.