GOG eNMEy mechanical semi-auto

[Rickfactor2]

GOG eNMEy

I believe this is a generation 1 as it has the eye cut-outs in the breach.

New ball detents installed.

I ran of our air but it seals and fires before it starts to leak a little. I believe the regulator needs a rebuild as it's overpressurizing.

Small crack in the body shell which is not much of an issue as it does not need to hold air.

Halo Too included with unfortunately, a cracked battery door and a hairline crack in the shell.

$75 USD shipped from Canada with no Halo Too

90 USD shipped from Canada with the Halo

Balance of parts kits and sleek lube included as pictured.

[Psycho91]

Yes this is a gen 1, the gen 2 had the better looking sleeker body

[ChoSanJuan]

And the G2 didn't have a valve that didn't detonate after a while.

[Rickfactor2]

ChoSanJuan - Thanks for taking a dump in my thread dude.

[Toestr]

The first generation was part for part a Vibe/ion XE clone in the bolt assembly and the second generation (which was originally sold as the original eNMEy Pro) was more like a Proto rail (same theory of operation).

The first generation had 2 different valves; the original all plastic and the later HD upgrade with a metal reinforcing plate on the bottom. The original will work fine so long as you don't go Incredible Hulk on the mounting screws or squeezing the trigger back.