:'( Sold
Welp, time to move this one along. In typical MCB fashion I fondled it, added stuff to it, and never got around to using. Picked it up off of someone who had it sitting a while. Inspected all existing o-rings and they are in good shape. If you don't already know, you adjust the velocity by the screw in the front. All the way in is lower, back it out for higher FPS. Neat, well made markers, this one being in a beautiful ano, but I can't justify keeping it. Another cool feature is the feedneck has 3 o-rings to hold your loader in place. These o-rings are in good shape. Feedneck is Angel threaded.
Valve was replaced with one of flyweightnate's, along with a better cup seal and high flow stem. These valves run at 400-500 psi.
These use Autococker threaded barrels and detents. One detent is a goner, so I am included 2x brand new detents from autocockerparts.com. The current detents don't move by hand, so expect to use pliers or something to remove them. Includes the stock .690 12" barrel and a new 14" CP Advantage .685 barrel. Hogue wrap arounds (which were stock on these) and bird cage style on/off ASA.
I can include the Palmers Stabilizer w/ new hose that needs cut, or for less dollars you can take it with just the PMI gas thru. You will also notice an aluminum stock Impulse bolt. I read that "some" Imp bolts work on Sentinels, so I grabbed one for cheap with plans of messing with. You will want to play around with o-ring sizing if you want to use it correctly, but it is included.
Also included is a red Redz marker bag.
Welp, time to move this one along. In typical MCB fashion I fondled it, added stuff to it, and never got around to using. Picked it up off of someone who had it sitting a while. Inspected all existing o-rings and they are in good shape. If you don't already know, you adjust the velocity by the screw in the front. All the way in is lower, back it out for higher FPS. Neat, well made markers, this one being in a beautiful ano, but I can't justify keeping it. Another cool feature is the feedneck has 3 o-rings to hold your loader in place. These o-rings are in good shape. Feedneck is Angel threaded.
Valve was replaced with one of flyweightnate's, along with a better cup seal and high flow stem. These valves run at 400-500 psi.
These use Autococker threaded barrels and detents. One detent is a goner, so I am included 2x brand new detents from autocockerparts.com. The current detents don't move by hand, so expect to use pliers or something to remove them. Includes the stock .690 12" barrel and a new 14" CP Advantage .685 barrel. Hogue wrap arounds (which were stock on these) and bird cage style on/off ASA.
I can include the Palmers Stabilizer w/ new hose that needs cut, or for less dollars you can take it with just the PMI gas thru. You will also notice an aluminum stock Impulse bolt. I read that "some" Imp bolts work on Sentinels, so I grabbed one for cheap with plans of messing with. You will want to play around with o-ring sizing if you want to use it correctly, but it is included.
Also included is a red Redz marker bag.
Comment