9-Volt VL Revolution F/S

[euangelion]

Have a nice 12-Volt Revvy up for grabs. (Please see updated info below!)

Comes as shown and is in overall good condition with typical wear and tear on the shells. No cracks or splitting. Lid in great shape and has two paddle style agitator. Uses one 9volt.

Price: $25 shipped/paypal'd

[Grendel]

FYI that is not a 9 VDC VL Revolution, they are easy to spot because the switch is down near the feed neck and your's has markings for 2 - 9 VDC battery installation. This is a 12 VDC Revvy that may or may not have the X board in it.

[Nxt1playr]

If it's a 12v design how can it run on one 9v. I ask because I have one as well just like this and thought the same thing

[Grendel]

It is basically a DC servo motor and this type of motor will actually run on a wide range of voltages just at different speeds. I've run old 9VDC Viewloaders on 2 series 9 VDC batteries (18 VDC) for higher speed which is well beyond the design limit of the motor which sometimes would burn out. That is why they came up with the 12 VDC regulated units. Runs faster then 9 VDC but within the typical 15 vdc limit and you have longer capacity due to using two batteries. If I remember correctly the motors are rated 7.5 vdc - 15 vdc.

[euangelion]

Thanks for the info always learning something!

[rawbutter]

So, does this run off one or two batteries, Euangelion? If it only needs one battery to work, I'll take it. It's always nice to have a spare.

[euangelion]

Just one

[XEMON]

Does it have they eye sensor or does it run continuously?

[euangelion]

Does have sensor that works properly

[euangelion]

Bump up