Z Force Body Kits, now with pump option

[woouulf]

Z Force Body Kits 200.00
Z Force Pump Body Kits 250.00
Choose your color ,
These use 11/16th valves..
Comes as shown only!
Do your research,

[Jonnydread]

ooh are these the backspin bodies??

[Roger7pball]

Not the backspin bodies, but they’re fun. They have quirks you need to learn to overcome which is why a lot of people aren’t fans of them. If anyone picks one up shoot me a PM and I can let you know what to watch out for.

[RuleOfSines]

Hm, just how badly do I hate myself...

[XEMON]

Is the notch on the side for the eye wire?
do they both have it?

Also, i assume no valve?

[RuleOfSines]

Is the notch on the side for the eye wire?
do they both have it?

Also, i assume no valve?

The body will accept an eblade eye, that shines up through the bottom of the top tube. However! The body milling is very narrow at the bottom and the frame hangs off the side. Anything other than a slim frame will.


9B953E48-571C-496C-8052-89D1C2D911CC.jpeg

[XEMON]

thanks for the info!
If i get it is likely to put a TJD kit on it ... if i can make it stop leaking 😅

[RuleOfSines]

Ooooooooh got bad news for you on that front...

If you want to install anything other than the Z-Force front end you'll have to re-thread the nose of the lower tube. Warped Sports decided everyone else everywhere was doing it wrong and went their own way with the threads.

[XEMON]

Dam ... sounds like a project i don't need to add to the list ... Buuuuutttt ..... Ive been wanting one of those oddities for a while ... 😋

[woouulf]

I have checked the WGP front block to the Z force and they are the same. Since these kits have the Banjo bolt it shouldn't be an issue...
.

[RuleOfSines]

True, if you just want to swap the front block its fine. If you want TJD then something has to get modified.

[woouulf]

Is the notch on the side for the eye wire?
do they both have it?

Also, i assume no valve?

Both have the eye milling.. And no 11/16 valve included...