CCM T-Grip Pump - 2K with two pump arms

[Hellion360]

CCM T-Grip pump handle
2K threads
Full length arm
Midblock arm - PARTED OUT

$125 Shipped. GONE Gone gonzo

Good shape but with a little wear spot where the pump arm threads in as pictured IMG_5680.jpg IMG_5681.jpg IMG_5682.jpg .

[$L!mBo]

pmd

[Hellion360]

Midblock arm parted out, price reduced.

[Hellion360]

Price updated.

[Hellion360]

Still available

[Hellion360]

Might be an ACP block on this, someone said.

[Hellion360]

Still have this

[Chuck E Ducky]

Surprised you still have this. Wish I had something to put it on these handles are hard to find and super comfortable. $125 is a deal to. I think you are correct on the ACP guild rod and plate. Lots of guys are going with the ACP parts they are great quality and almost identical to the CCM parts.

That handle is actually called the Ez-T as it’s got the round bottom and a spot for the lower guild rod. The original T handle didn’t have a spot for the 2nd lowered guide rod and had a flat bottom. This one will fit a lot of the newer CCM kits and such ware the older one with the flat bottom won’t due to a lot of the newer kits have that extra guide rod.

These are cool you don’t see them often and feel awesome.

[Grendel]

I'll take it, PM inbound.

[Snowking63]

Chuck E Ducky would that be an older version of mine? Mine is flat on the bottom but also takes the lower guide rod. I bought this handle from someone here on mcb 4 or 5 years ago

[Chuck E Ducky]

That’s cool usually the standard T don’t take the 2nd guild rod. Some of them came with different diameter main guild rods to depending on when it was made. Some of the newer handles have a good amount of play on the some of the older fluted main guide rods. I thought the standard T handle was only available special order on the early T2

[Snowking63]

Chuck E Ducky I have an early model T2 with T handle also. This is #49