14" Dye UL Phantom Barrels, Phantom T-Stocks and Trigger Shoes

[Grendel]

I am back with another installment of NOS 14" Dye Ultra Light Barrels made for Phantoms.

These are not bored for Feak Inserts and they are currently unglued (epoxied). That being said I have made a fixture for gluing (Epoxy) them and will do so for $15 each prior to shipping the barrels if you like. If you do want yours glued up expect at least a 24hr delay on getting them shipped as I can only do one barrel at a time and the epoxy I am using is not full cured for 24 hrs..

Shipping is not included in the price but given what it has cost me for the last barrels that went to a wide range of places CONUS expect shipping to be between $10-$13 USPS 1st Class for 1 barrel.

So here is the list and images below that. They are listed in order top down in the images.

1. Clear - $125 (+ shipping)
2. Silver/Black acid wash - $125 (+shipping)
3. Red/Black acid wash - $125 (+shipping)
4. Yellow/Black acid wash - $125 (+shipping)
5. Blue/Black acid wash - $125 (+shipping)
6. Green/Silver acid wash - $125 (+shipping)
7. Green/Black acid wash #1 - $125 (+shipping)
8. Green/Black acid wash #2 - $125 (+shipping)
9. Green/Black acid wash #3 - $125 (+shipping) (Note this barrel is already glued up before I inherited it but it looks good down the bore)

Next is I have 3 T-Stocks for sale two acid wash and one clear.

1. Gold T-Stock - $100 (+shipping) SOLD
2. Yellow/Orange acid wash T-Stock - ($125) (+shipping) SOLD
3. Clear T-Stock - $80 (+shipping) SOLD

Finally I have 9 Trigger Shoes:

1. Clear Trigger Shoe - $15 (+shipping) SOLD
2. Clear Trigger Shoe - $15 (+shipping) SOLD
3. Clear Trigger Shoe - $15 (+shipping) SOLD
4. Clear Trigger Shoe - $15 (+shipping) SOLD
5. Dark Blue Trigger Shoe - $15 (+shipping) SOLD
6. Dark Blue Trigger Shoe - $15 (+shipping) SOLD
7. Dark Blue Trigger Shoe - $15 (+shipping) SOLD
8. Silver/Blue acid wash Trigger Shoe - $20 (+shipping) SOLD
9. Silver/Blue acid wash Trigger Shoe - $20 (+shipping) SOLD

Open to Trades:

• Black/Silver Acid wash parts for a Phantom
• Green/Silver Acid wash Phantom or parts to make a marker
• Anodizing services, if you anodize parts and can handle some basic black we could work out a deal I have some small parts I need done
• E-Flex Mask (NOS or very lightly used)
• Rotor
• Old School Nelson Clone hardware like pump, frame and valve mounting hardware (LAPCO or Wintec style mostly)
• Stock EMF100
• RF 97/98 STP (body)
• RF Pre-2K Slab sided body Center Feed or Right Feed
• Pre 2K WGP Featherlight Body with early P-Block
• Magic the Gathering cards (got sucked back into playing Commander 🙄)

[redsquirrel]

Jonnydread gold tstock?

[Grendel]

I showed it to Jonny the other day

[Jonnydread]

It’s very cool, but I’m a non stock loosey goosey kinda fella

[redsquirrel]

I can respect that loosey goosey game.

[Grendel]

All messages responded to and OP updated.

[JeepDVLZ45]

shooter311 and Impactfour

There’s a green/silver wash up there!

[Impactfour]

Oh Jesus that's tempting but I ought to hold off, thanks for thinking of me!

[Grendel]

Okay, all communications caught up, OP updated with statuses. Shipping will be quoted so if you get more shipping usually gets cheaper relative to the purchase .

I prefer money but will entertain trades/services if we can work out a negotiated settlement.

• Black/Silver Acid wash parts for a Phantom
• Anodizing services, if you anodize parts and can handle some basic black we could work out a deal I have some small parts I need done
• E-Flex Mask (NOS or very lightly used)
• Rotor
• Old School Nelson Clone hardware like pump, frame and valve mounting hardware (LAPCO or Wintec style mostly)
• Stock EMF100

[Grendel]

Back to the front page, PMs answered and OP fully updated.

[Grendel]

OP Updated, back to the front.

[Grendel]

"Up, Up and Away"

[Grendel]

OP updated, all of the barrels are still available so back to the top.

[Grendel]

Thinking about taking these down and see about having them bored for 5" standard Freak Inserts. Would that make them more attractive, it will add cost?

[redsquirrel]

Personally, I like that they aren’t freak bored. They work great with the ASP detent mod.

[Grendel]

I'm with you I do a Spyder Detent mod on my Phantoms and with a 0.684 to 0.687 barrel back they work just fine. It just seems a lot of players are hard set on Freak Barrels. I have been chatting in PMs and it might not be possible due to these barrels having an o-ring groove already, just waiting on a response from BMC to see if it is in the realm of doable.

[Grendel]

Back to he front page

[Grendel]

Updated OP with my trade interests but if you want a barrel and have something of value you want to offer up in trade/services I am always open to negotiation and bartering.

[Grendel]

To the top