Pneumag Frames, Cocker Frame, VD Foregrip & More

[Levi]

I'm pruning back parts & projects to just the things I'm highly motivated to finish. I'll probably be adding items through this weekend as I dig through totes. Free shipping (CONUS) on purchases totaling $30 and up.

Up first is the Intelliframe with Luke's T-Rex installed. T-Rex install and machining of frame was done by Luke. Never seen the field, only been mocked up on various Automag assemblages. Looking for SOLD {$150} SOLD






Next up, Magnus M90 frame. Includes the MPA-3 actuator, set screws, and Angel grips as pictured. MPA-3 has been machined flat on the sides for proper install in the frame. Raw, no trigger. SOLD {$150} SOLD

[Levi]

Venomous Designs foregrip. Brand new condition, zero blemishes, has never been mounted to a marker or had a screw put in its threads. These are cool as heck and feel great in the hand, but at this point I've had it at least a decade, haven't used it and it doesn't match anything I plan to build in the next 5+ years. From what I have found, Cougar last did a run of these in June of 2020 and they were $125 plus shipping. Because of the rarity and brand new condition I feel like {$125 shipped} isn't an unreasonable place to start. **Edit** I see El Gringo has a raw one for $100, so let's go {$100 shipped} SOLD { $75 Shipped for this one. } SOLD







New Old Stock 32 degrees Cocker frame. I came across 3 of these a while back. I put one on my 02 vert feed to replace the cracked plastic one. It's a decent frame, not amazing but it does the job and will be staying on the gun. The grip screws are metric, but I will include the correct metric screws plus a few spares. No internals, what you see is what you get. SOLD $65 SOLD

---

Adding more stuff...

Luke's angled drops, I forget what they are called. Never used, raw. SOLD { 2 available $15 each } SOLD




Warp left ULE rail, low miles, includes rail bushing as pictured. SOLD { $45 } SOLD





Emag rail, raw. This has a little bit of endmill chatter in a couple spots on the sides, otherwise a nice rail. A little bit of something custom machined on the sides could make this a really neat piece. I tried to get it to show up in the pics, on the passenger side there is one spot just behind where the sear pin threads in, and a couple spots in about the same location on the driver side. You can feel it when you run your finger across it, you'd definitely want to clean it up before getting it annoed. SOLD { $45 } SOLD

[Levi]

Classic Automag bodies.

• Powerfeed with some stupid name polished into the side GONE {FREE IF I AM ALREADY SHIPPING YOU SOMETHING AND THERE'S ROOM IN THE BOX}
• Right feed with nothing stupid on it SOLD {$5} SOLD

Next... you can chrome out your gat and achieve a level of cool that hasn't been popular since 1997 with this sweet 32 degrees Automag frame. SOLD { $30 } SOLD and I reserve the right to dispose of the original packaging to make it fit in a smaller box. Note: it has the "wings" so it fits classic Mag rails only.





Grips, none of these are beautiful but they are all functional
Left -Looks like something smart parts $4
Middle - Black Dye sticky SOLD { $4 } SOLD
Right - Blue Dye sticky, the backstrap has been cut off SOLD { $4 } SOLD




Top to bottom:

• Minimag body somebody spraypainted. I stripped the paint off the back end with acetone and scotch-brite, seems like it should clean up ok. SOLD{ $25 } SOLD
• Classic Mag rail with a foregrip, rail bushing and twistlock pin included. Scratches and tape residue come at no extra charge. I've seen uglier but she's no beauty queen that's for sure.SOLD { $15 } SOLD
• Classic Mag sear with pin SOLD { $5 } SOLD
• And last but not least the abomination piece of crap at the bottom is a classic Mag rail that I experimented on when I first tried pump milling. The pump mill channel doesn't work right... I think the ramp angle is messed up. Regardless... if I am already shipping you something and I can add this to the box without increasing the shipping costyou can have this for free. And if I ever cross paths with it in public I will pretend like I never met it while desperately trying to forget the shameful things I did when I was alone with it. GONE

Moving on to drops & rails...
Top to bottom

• PTP drop SOLD { $8 } SOLD
• Unbranded black drop SOLD {$5} SOLD
• CP rail with jewel & set screws SOLD{ $8 } SOLD
• CP rail without jewel & set screws SOLD{ $4 } SOLD
• Small DYE rail with jewel could use some cleanup SOLD{ $3 } SOLD
• Slightly larger DYE rail without the jewels $4

Trilogy Body with new in package Lazarus valve. Includes everything pictured LPR, bolt, pin, etc. Lower tube is empty. Lots of light scratches in the anno but nothing deep. Would clean up really nice if you got it annoed. Let my project become your project for SOLD { $100 } SOLD





From top to bottom:

• Classic RT sight rail. Somebody stripped the anno with a sander it appears, it really looks like garbage. At one point I was planning to get creative with milling the surface into something cool. My motivation for this is now zero. Perhaps you can do something cool with it? $2
• Classic RT foregrip. Overall pretty decent for it's age. A few small nicks in the anno, lasering still looks good, and rubber is in good shape. SOLD{ $25 SOLD
• Gas through foregrip. Possibly a KAPP?? IDK? Has a few nicks in the anno, but overall not bad shape. $5
• Grip panel for classic Automag CF frames. Not a pair, just the one side. If I'm already shipping you something and you want this it's GONE{FREE}GONE
• Intelliframe trigger, trigger pivot pin, and safety assembly. Brand new never used. SOLD { $10 } SOLD
• Automag Classic bolts. Standard or venturi style your choice $5 Each
• Emag parts. Two pins and plastic lever. Free if I am already shipping you something. GONE

Pneumag / mad scientist experimenter parts. Everything you see in the picture including the plastic organizer case. SOLD{ $40 } SOLD




Barrels from top to bottom:
Armson stealth rifled barrel. OD green, includes two jewels. SOLD { $20 } SOLD
Mystery spiral ported barrel SOLD { $10 } SOLD
Twistlock freak back. Has some scratches in the twistlock pin area, but do not show when installed See additional pics of scratches SOLD { $50 }SOLD







JT Flex lower. Like new never used$15

[Levi]

Pump milled Automag body SOLD { $15 } SOLD




From to to bottom:
Small blue Shocktech rail. Very nice looks new. SOLD [s]{ $8
Small black rail. Used condition & has some scratches SOLD { $2 } SOLD
I found two more of Lukes angled drop things. $15 each



From top to bottom:
Lukes de-volumizers for X-Valve SOLD { $5 gets you both of them.} SOLD
Unknown regulator SOLD { $5 } SOLD
Clamping feedneck Angel threaded. It clamps by squeezing a stack of o-rings that grips the hopper neck. SOLD { $3 } SOLD
Unireg Violator reg piece. Has scratches & dings SOLD { $3 } SOLD



Next...

• Black Armson Stealth rifled barrel. I think these might be Spyder threads, but I don't own a Spyder. If it's not obvious from the pictures let me know and I can take some measurements.SOLD{ $15 } SOLD
• Vertical ASA for classic Automag rails. Used with a few nicks but not destroyed. SOLD { $5 } SOLD

Two delrin pump handles, with one return spring. A quick measurement of the center hole shows approx 0.515" ID.SOLD { $10 gets you both of them. } SOLD








Good grief, I don't remember buying so many OG Mag freak backs... but here we are, I've found another. Pretty good shape, some anno wear where it slides into the body as seen in the pics.SOLD { $50 } SOLD

[Jordan]

Pm'd on the 32° frame.

[Meleager7]

he has a pgp for sale as well

[Jordan]

Meleager7 I saw, trying to do one project at a time. 🙂

[Levi]

Items added, there is more to come tomorrow. PM's replied, and pending / sold items marked. If I missed anyone please ping me again.

[Alexndl]

I would take both CP rail and the minimag body

[77monteballer]

pming

[Alexndl]

I will take the RT foregrip and pneumag parts

[Levi]

Added some things & dropped some prices. PM's replied, updated pending & sold items.

[Levi]

Added some stuff and updated availability.

[Levi]

Posted another Mag freak back and dropped prices on several items.

[warbosschoppa]

Pmd

[Levi]

Ok guys, I'm tapping out. As far as this thread goes I don't see anything else to post. Availability of items has been updated and all PM's returned. If I missed anyone, please speak up.

Prices reduced further on several items. That stupid ass "RHINO" Automag body is now free if there's room in the box I'm already sending you. If nobody claims it, one of ya'll at random is getting that dumb thing inserted in your box. If you would like to be guaranteed not to get it... the price for that is $1...lol!

[bpiatt]

I'll take the emag rail that's pending if it falls through somehow