Autococker, Sheridan, Stock Class, CCM, Bolts, Frame, Barrels, Regs, ASA's etc Parts

[Ego10Baller]

For sale is the following:

• WGP 2k+ RF Body and Backblock - $75
• 2x CCM Bolts - $70 each
• Doc's Autococker Ball Detent - $15 ($10 if shipped with another item that isn't the Shocktech cocking rod)
• Freeflow Evo length bolt - $30
• ID V2 3 Way - $40
• CCM White Pump Handle and Semi Gloss plate - $80
• Inception Designs Barrel Kit - .675, .680, .685 dust backs and .689 gloss front - some slight wear on the barrel tip but in very good shape otherwise - $50
• CCM Guide Rod and guide plate - $60
• Doc's Tanto Barrel - 5" Freak Bore - $60
• Dye Hyper 3 Reg - $35
• PPS Sheridan Battle grips - $20
• Duckbill ASA of sorts - In the sconi style but no sconi name is anno'd on it - $25
• Phantom top of body rail - $15
• CCM Delrin Backblock - $40
• Phantom 3D printed horizontal feed - $20
• CCM EZ Pump kit - can come with either a pre-2k CCM guide rod and base or a 2k+ guide rod and base (or both for an additional $60) - $135
  
  SOLD ITEMS:
• CP V3 Reg - $50 SOLD
• PE ASA and Rail - $50 SOLD
• Meteor Frame with Shocktech trigger plate and I believe a Shocktech roller sear. Cannot confirm for certain on the roller sear - it has the smoothest and lightest trigger pull that I've felt on a cocker frame on this one though. Please note pictures for photos of top of frame for internal part identification. A sweet frame and my favorite that I've used - $135 SOLD
• Shocktech Cocking Rod - $15 ($10 if shipped with another item that isn't the Doc's detent) - SOLD
• CCM Autococker lower internals - bought from CCM a year back - new production. Put in a marker but never used outside of velocity adjustment at the chrono range. - $85 - SOLD
• Freeflow 2k Autococker bolt - $30 - SOLD
• RTR Boomerang - $35 SOLD
• Inception ASA and Rail - $50 SOLD
• Inception Front Block and Banjo Bolt - from an ID Predator Autococker - $60 SOLD
• CP Mini ASA - no fitting on this one - in very good shape - $20 SOLD
• Beavertail stub - this is aluminum, not the 3D printed one - $20 SOLD
• Mystery Beavertail that is sort of wavy with a machining mark on it - $20 SOLD
• Freak 5" barrel insert kit - 2x .684, 1x .682, 1x .687 - $20 ($15 if shipped with another item) - SOLD

[Ego10Baller]

Additional Photos

[iamthelazerviking]

Sending pm

[Autococker07]

pm sent

[Alexndl]

Pm inception ASA, ccm internal and pps battle grip

[Tracker]

interested in that ASA, depending on age, I'm looking for one thats a couple years old

[Ego10Baller]

Updating the thread as items sell and responding to pm's

[Melrosejedi]

Will take the RTR bomerang and the wavy beavertail.

[latches109]

Dang

[Ego10Baller]

Ok sent you a pm

[BrendanB]

ill take

• Beavertail stub - this is aluminum, not the 3D printed one - $20

[Ego10Baller]

Ok pmd you

[CheapChi]

I’m interested in the phantom “top of body rail”. Is that the horizontal feed I see in the lower right near the boomerang? If so, can you post or send me better pictures to include the underside and inside the tube, please?

[Ego10Baller]

Sounds good. It's a 3D printed horizontal feed that I bought a few years back - brand new and unused. If you still want pictures knowing it's 3D printed I can provide them.

[CheapChi]

Thank you for clarifying. Yes, I would still like pictures, please.

[Ego10Baller]

Packing materials arrived this morning. Packing everything up that has sold and dropping it off at USPS for shipment today.

[Ego10Baller]

Updated thread with sold / vs available items and added a CCM EZ pre-2k EZ pump kit for sale