Clearing out some unused parts. Open to offers while I gauge interest. I added their eBay links below for convenience, but if you’d prefer PayPal, Venmo, or Zelle, feel free to send me a PM.
-Prices are not firm
-Free Shipping
1. Krusher Autococker Hinge Frame - Nickel - $50
https://www.ebay.com/itm/177083480376?itmmeta=01JVZMKWQB89RV7332K7Z02MHH&ha sh=item293aff7938:g:k1sAAOSwjV1oH69~
This is a Krusher Paintball-branded hinge frame, finished in polished nickel. It’s a rare part from a brand with limited production history and minimal documentation. Based on community research, Krusher markers were likely produced around 2003 to 2004, with evidence suggesting that bodies may have been initially milled in the U.S., possibly by OTP or a similar shop, and later assembled or completed by AIM because complete markers often came equipped with System X pneumatics and internals, supporting the theory of a multi-source build approach.
The nickel finish on this frame is especially noteworthy, as it does not match any of the four known Krusher production colorways (gloss black, pewter, black and blue fade, or black and pewter fade). It may have been a pre-production part, a limited aftermarket release, or even from an early run before AIM became involved. The exact history is unclear, and much of what is known remains speculative.
2. CCI Phantom 12g Dropout Changer – Excellent Condition – Rear Valve Mount -$60 SOLD
https://www.ebay.com/itm/177101982921
This is an original CCI Phantom 12g dropout changer, which mounts directly behind the grip frame and threads into the rear of the Phantom marker, replacing the standard valve body. It allows for quick rearward ejection and replacement of 12 gram CO₂ cartridges, making it a streamlined solution for stock class play.
This part is in excellent condition, with clean threads and no major scratches or wear. As shown in the photos above, the dropout changer includes the pierce pin, but does not include the internal valve components (valve spring and power tube assembly) that thread into this part.
It is the genuine CCI-manufactured version, produced under the original owner, Mike Casady. Following Mike’s retirement in 2022, CCI was passed on to new owners dedicated to preserving the Phantom legacy, but this dropout changer is no longer in production.
3. CCI Phantom Body - Excellent Condition - Vertical Feed - $40
https://www.ebay.com/itm/177083543077?itmmeta=01JVZMKWQBG1DKGQ39SXQFWK1F&ha sh=item293b006e25:g:KZkAAOSww2NoH7TS
This is an original CCI Phantom vertical feed breach body, designed to accept a vertical feedneck for use with stick feeds or hoppers. It’s an ideal option for players looking to build or convert a Phantom to open class or run a vertical feed setup for pump play.
The body is in excellent condition, with clean threads, a smooth gloss black finish, and no major scratches, gouges, or wear. As shown in the photos above, the feedneck is not included, but the body is otherwise fully functional and ready for installation.
This is a genuine CCI-manufactured part, produced during the era when CCI was operated by its founder, Mike Casady. Following his retirement in 2022, CCI transitioned to new ownership that has worked to continue supporting the Phantom platform. However, parts like this vertical breach body are no longer in regular production.
4. CCI Phantom 8" Smooth Bore Barrel – Silver – Detent Ring Kit Included - $40 SOLD
https://www.ebay.com/itm/177083569507?itmmeta=01JVZMKWQBANA8RZ7A8FWER75B&ha sh=item293b00d563:g:YAMAAOSwtPxoH7sV
This is an original CCI Phantom 8-inch smooth bore barrel, finished in silver anodizing. The barrel is in excellent condition, with clean threads, a smooth internal bore, and no major scratches, gouges, or wear. As shown in the photos above, it also includes a CCI detent ring system, designed to control paint-to-barrel match and prevent rollouts. The kit includes the original set of five color-coded rings (.670 to .685), along with the factory installation instruction sheet.
It is the genuine CCI-manufactured version, produced during the tenure of original owner Mike Casady. After Mike’s retirement in 2022, CCI transitioned to new ownership committed to preserving the Phantom platform, though parts like the ring kit and color anodized barrels are no longer in regular production.
-Prices are not firm
-Free Shipping
1. Krusher Autococker Hinge Frame - Nickel - $50
https://www.ebay.com/itm/177083480376?itmmeta=01JVZMKWQB89RV7332K7Z02MHH&ha sh=item293aff7938:g:k1sAAOSwjV1oH69~
This is a Krusher Paintball-branded hinge frame, finished in polished nickel. It’s a rare part from a brand with limited production history and minimal documentation. Based on community research, Krusher markers were likely produced around 2003 to 2004, with evidence suggesting that bodies may have been initially milled in the U.S., possibly by OTP or a similar shop, and later assembled or completed by AIM because complete markers often came equipped with System X pneumatics and internals, supporting the theory of a multi-source build approach.
The nickel finish on this frame is especially noteworthy, as it does not match any of the four known Krusher production colorways (gloss black, pewter, black and blue fade, or black and pewter fade). It may have been a pre-production part, a limited aftermarket release, or even from an early run before AIM became involved. The exact history is unclear, and much of what is known remains speculative.
2. CCI Phantom 12g Dropout Changer – Excellent Condition – Rear Valve Mount -$60 SOLD
https://www.ebay.com/itm/177101982921
This is an original CCI Phantom 12g dropout changer, which mounts directly behind the grip frame and threads into the rear of the Phantom marker, replacing the standard valve body. It allows for quick rearward ejection and replacement of 12 gram CO₂ cartridges, making it a streamlined solution for stock class play.
This part is in excellent condition, with clean threads and no major scratches or wear. As shown in the photos above, the dropout changer includes the pierce pin, but does not include the internal valve components (valve spring and power tube assembly) that thread into this part.
It is the genuine CCI-manufactured version, produced under the original owner, Mike Casady. Following Mike’s retirement in 2022, CCI was passed on to new owners dedicated to preserving the Phantom legacy, but this dropout changer is no longer in production.
3. CCI Phantom Body - Excellent Condition - Vertical Feed - $40
https://www.ebay.com/itm/177083543077?itmmeta=01JVZMKWQBG1DKGQ39SXQFWK1F&ha sh=item293b006e25:g:KZkAAOSww2NoH7TS
This is an original CCI Phantom vertical feed breach body, designed to accept a vertical feedneck for use with stick feeds or hoppers. It’s an ideal option for players looking to build or convert a Phantom to open class or run a vertical feed setup for pump play.
The body is in excellent condition, with clean threads, a smooth gloss black finish, and no major scratches, gouges, or wear. As shown in the photos above, the feedneck is not included, but the body is otherwise fully functional and ready for installation.
This is a genuine CCI-manufactured part, produced during the era when CCI was operated by its founder, Mike Casady. Following his retirement in 2022, CCI transitioned to new ownership that has worked to continue supporting the Phantom platform. However, parts like this vertical breach body are no longer in regular production.
4. CCI Phantom 8" Smooth Bore Barrel – Silver – Detent Ring Kit Included - $40 SOLD
https://www.ebay.com/itm/177083569507?itmmeta=01JVZMKWQBANA8RZ7A8FWER75B&ha sh=item293b00d563:g:YAMAAOSwtPxoH7sV
This is an original CCI Phantom 8-inch smooth bore barrel, finished in silver anodizing. The barrel is in excellent condition, with clean threads, a smooth internal bore, and no major scratches, gouges, or wear. As shown in the photos above, it also includes a CCI detent ring system, designed to control paint-to-barrel match and prevent rollouts. The kit includes the original set of five color-coded rings (.670 to .685), along with the factory installation instruction sheet.
It is the genuine CCI-manufactured version, produced during the tenure of original owner Mike Casady. After Mike’s retirement in 2022, CCI transitioned to new ownership committed to preserving the Phantom platform, though parts like the ring kit and color anodized barrels are no longer in regular production.
Comment