PTP Warp Feed Orange

[jpdgas]

Up for sale is a PTP Warp Feed with an orange shell. I picked it up a while back and never got around to using it or even mounting it. No cracks, battery door stays put, and it spins when the button is pressed. There is some mild discoloration, probably from paint left on it. You will need all of the hardware to mount it, and either the PTP mount with the sensor or a trigger switch on an AGD frame. *It may have an AGD board in it, maybe someone can confirm, pic below*
Feel free to ask any questions.
$85 shipped CONUS, Paypal

[Reflex0283]

Wish I had the money for this

[Super Nova]

Had some questions about how these work so I sent ya a pm, might be interested in it.

[Kit352]

FYI you don't need to add a sensor to these if you don't want to. The board has a built in one so just move the jumper and your golden. It's not as good as an intelli switch but it's good enough if you have an older gun that shakes and makes noise.
This is a steal if your looking for one. Tubing and I think the mount can still be bought at ptp.

[jpdgas]

Thanks for the info, I didn't realize that. I'll play with the jumpers and test it out!

[jpdgas]

So when I checked the jumpers, the dwell jumpers were all full and the sens and negative jumpers were on the sensor side. I put it back to what the manual says is default. It doesn't spin on vibration still, and looking at it, I'm not sure it's a PTP board, it may be an AGD board in a PTP body. That said, I hooked it up to a switched intellifeed and changed the jumpers to use it and it spins right up with the trigger pull.