Looking to clear out some of my projects and just focus on the gun builds I really want to get to this year.
John Gross right feed cocker body/parts. This one I asked John Gross on facebook if it was one of his bodies and he did confirm it was, even though it isn't engraved on the body. Weird thing with this one, the hammer lug hole was drilled out way too big and they tapped the hole for a asa air port threaded plug, other than that, the threads all look good and I added a front block that I thought had similar milling and some random pneumatics I was gonna try rebuilding, but other projects take precedent. - 375
P Blocked Sto Mini Cocker body with p block, matching front block, p block belsales bolt/pin, and a stainless vasa. This body is pretty with the gloss red.blue/black ano, but is kind of a basket case. The front and rear frame body threads are very weak, only a few threads left, they did hold up for last season when I had this as a full build, put decided to steal parts from it for another build and dont need the body anymore. The other problem is that the front block banjo threaded hole is drilled off center, pitching the banjo bolt slighty up when trying to thread it in. I used a washer to take up the slop in the threads and that worked great, got it to seal and not leak, but you need to use that washer if you plan on building the gun out as is - 150 - SOLD
WYLDE SIDE body. Has a relief cut by by the breach, I was told carter and bbt did that for some of their bodies. Comes with a p block length belsales bolt/pin and a shocktech pre2k vasa. This bodies frame screw threads have been helicoiled. - 175
Kapp groovy frame, frame is chrome, has small pits where the grips would mount, chrome definitely needs a polish to really shine again.
Prices are pp/shipped, pm for better pictures/questions
Thanks for looking
John Gross right feed cocker body/parts. This one I asked John Gross on facebook if it was one of his bodies and he did confirm it was, even though it isn't engraved on the body. Weird thing with this one, the hammer lug hole was drilled out way too big and they tapped the hole for a asa air port threaded plug, other than that, the threads all look good and I added a front block that I thought had similar milling and some random pneumatics I was gonna try rebuilding, but other projects take precedent. - 375
P Blocked Sto Mini Cocker body with p block, matching front block, p block belsales bolt/pin, and a stainless vasa. This body is pretty with the gloss red.blue/black ano, but is kind of a basket case. The front and rear frame body threads are very weak, only a few threads left, they did hold up for last season when I had this as a full build, put decided to steal parts from it for another build and dont need the body anymore. The other problem is that the front block banjo threaded hole is drilled off center, pitching the banjo bolt slighty up when trying to thread it in. I used a washer to take up the slop in the threads and that worked great, got it to seal and not leak, but you need to use that washer if you plan on building the gun out as is - 150 - SOLD
WYLDE SIDE body. Has a relief cut by by the breach, I was told carter and bbt did that for some of their bodies. Comes with a p block length belsales bolt/pin and a shocktech pre2k vasa. This bodies frame screw threads have been helicoiled. - 175
Kapp groovy frame, frame is chrome, has small pits where the grips would mount, chrome definitely needs a polish to really shine again.
Prices are pp/shipped, pm for better pictures/questions
Thanks for looking
Comment