SOLD! Nova autococker slide frame + all the guts: $160 shipped & pp'd (continental US) SOLD!
Bought this earlier this month (Jan '26) for a Trilogy build, but never used it. Bit of a fiasco with missing parts when first received (entire safety assembly & the sear set screws), which they later sent after I asked about it 3 times.
The kit didn't come with frame screws from Nova, but they aren't advertised, either, so can't fault them for it. I only realized when I tried to install it and the stock Trilly screws are obviously way too long. I don't have any to include, sorry.
I also realized the Trilly's factory 3way rod won't work with it since the hole in the slide frame trigger sits further forward.
Anyway, I've soured on using this frame for the build, and spent too much time on it already. I was going to return it, but paying the restock fee + return shipping is the same as just selling it used.
So here you go!
List of parts:
Side notes - The 2 rods bagged with the sear are useless; there are 2 set screws that it pivots on, which honestly works fine, but just fyi. Also, the rear brass-tipped guide screw for the trigger has to be dropped in from the top, and meticulously screwed in reverse to lower into its hole. Finally, the safety ball and spring sit on top of the safety, and the spring is held in place with the marker body.
Bought this earlier this month (Jan '26) for a Trilogy build, but never used it. Bit of a fiasco with missing parts when first received (entire safety assembly & the sear set screws), which they later sent after I asked about it 3 times.
The kit didn't come with frame screws from Nova, but they aren't advertised, either, so can't fault them for it. I only realized when I tried to install it and the stock Trilly screws are obviously way too long. I don't have any to include, sorry.
I also realized the Trilly's factory 3way rod won't work with it since the hole in the slide frame trigger sits further forward.
Anyway, I've soured on using this frame for the build, and spent too much time on it already. I was going to return it, but paying the restock fee + return shipping is the same as just selling it used.
So here you go!
List of parts:
- frame
- sear, sear set screws, sear spring
- slide trigger, brass-tipped guide screws, 3 different tension springs
- safety button, c-clip, spring, and ball
- my warmest regards
Side notes - The 2 rods bagged with the sear are useless; there are 2 set screws that it pivots on, which honestly works fine, but just fyi. Also, the rear brass-tipped guide screw for the trigger has to be dropped in from the top, and meticulously screwed in reverse to lower into its hole. Finally, the safety ball and spring sit on top of the safety, and the spring is held in place with the marker body.
Comment