Tons of HPRs, LPRs, CP direct mount ASAs, & right feed body kits

[Ray4624]

apparently my account is too new...id like to buy the green asa

[Chuck E Ducky]

Yes there are restrictions on new accounts to reduce spam / scam accounts.

[heit1_32]

Sent you a PM 👍🙂

[heit1_32]

Bump

[heit1_32]

Bump

[Hairball1969]

Are those ASA's mini or full size? Oh and do you still have them?

[heit1_32]

They are all full size ASAs and the ones pictured are all still available! I just updated the photo a few days ago : )

[zmannz1984]

What color regs do you have left? I need an LPR and an HPR. Black preferred but other would do. As long as they work I don't care about used or new.

[heit1_32]

What color regs do you have left? I need an LPR and an HPR. Black preferred but other would do. As long as they work I don't care about used or new.

Top row #2 and #3 are blue (they show up darker in the photo).

Here's a photo of the HPRs & LPRs I still have. For a gloss black HPR I highly recommend the one in the bottom right. It's an evil Detonator reg which are actually quite high end even though they got a bad reputation due to people accidentally breaking them. I'd ask $40 for that one. Here's a write up on them:

"Detonator regs are quite high-performing when rebuilt properly. The old HaveBlue tests showed that their recharge rate was second only to the AKA 2-Liter+, and it was actually faster than the AKA Sidewinder. They have unique internals, with a brass-tipped piston that has a steel tube brazed to it which has a nitride coating, which made it very hard and smooth. The lower reg seat retainer was also brass, so all metal-metal contact involved brass as one of the two metals, allowing for a smooth ride. That, coupled with the urethane o-rings, which have a much lower stiction than BUNA and less deformation leading to less drag, made the Detonator pretty darn impressive. Honestly, I'm a little surprised it's not legendary, but I suspect that the main reason why is if you try to lower the reg pressure while aired up without letting a couple shots out, the piston tip can just dig straight into the reg seat and ruin it. Of course, this is all specified in the instructions it came with, but nobody did a proper RTFM when they were a kid."

Your best bet might be the gloss black evil detonator reg (or one of the ANS chrome or black HPRs on the far left) and then one of the mini chrome/nickel plated LPRs. Those might give you the best color match. The mini LPRs I'd ask $20 each for.

Everything is fully rebuilt and working. The Evil D HPR has a brand new reg seat and all new o-rings in it.

[zmannz1984]

Awesome! I will definitely snag the evil reg. What brand are the mini LPRs? And do you happen to know the outer diameter?

[heit1_32]

One on the left is WGP, other I'm not sure. I'm hooking up the WGP one to test rig to ensure it works and I'll set the Evil D to 300 PSI

[DirtyLoincloth]

PMd about dust orange new CP ASA

[zmannz1984]

I will pm you about the evil, definitely going to grab that. If the wgp mini is something i can still get a seat for, will grab that too.