Closing thread as this is now going to be parted out. https://www.mcarterbrown.com/forum/b...eak-sp8-cp-etc
This project changed ideas about 40 times and finally ended up in this configuration. With 4 cocker projects in the works I need some funding to get things moving.
CCI/EV Internals, Trigger, Sight ring, T-Stock
Wevo Pump Kit
Lapco Bigshot 684
ASP Roundhead Cocker body
Doc's Machine ICD Phantom valve
ICD Lever changer
WWA Feed
Venom Designs Grips
Extras (Everything SOLD except for CCI pump handle)
OK, now on to some important bits.
1 - The WWA feed has damage on it. There is screw damage up front and a dent in the back. Still functional, but it is in rougher condition than I like.
2 - The grip was drilled by me for mounting the T-stock, and despite my best efforts, I somehow still made the holes slightly too close together. You can make it work, but not the best job.
3 - On the T-stock, I have filed down the little edges where the flat part meets the grip (anyone who has tried to mount a CCI stock on a different gun knows what I mean).
4 - The ICD changer was milled in order to allow the feed tube to sit flush with the body. Works, but the area is raw, just FYI.
5 - Doc's valve does NOT have the valve sight rail screw holes (it is too small) so you can NOT mount a SpringPheed from CCI... (I found this out the hard way)
I can get further pics for anyone if requested.
Price - $380
Parting - I am open to parting if a majority of this can go. But I prefer to sell as a package.
No trades, I have to sell this or my kidney to pay for Vee Twin
This project changed ideas about 40 times and finally ended up in this configuration. With 4 cocker projects in the works I need some funding to get things moving.
CCI/EV Internals, Trigger, Sight ring, T-Stock
Wevo Pump Kit
Lapco Bigshot 684
ASP Roundhead Cocker body
Doc's Machine ICD Phantom valve
ICD Lever changer
WWA Feed
Venom Designs Grips
Extras (Everything SOLD except for CCI pump handle)
OK, now on to some important bits.
1 - The WWA feed has damage on it. There is screw damage up front and a dent in the back. Still functional, but it is in rougher condition than I like.
2 - The grip was drilled by me for mounting the T-stock, and despite my best efforts, I somehow still made the holes slightly too close together. You can make it work, but not the best job.
3 - On the T-stock, I have filed down the little edges where the flat part meets the grip (anyone who has tried to mount a CCI stock on a different gun knows what I mean).
4 - The ICD changer was milled in order to allow the feed tube to sit flush with the body. Works, but the area is raw, just FYI.
5 - Doc's valve does NOT have the valve sight rail screw holes (it is too small) so you can NOT mount a SpringPheed from CCI... (I found this out the hard way)
I can get further pics for anyone if requested.
Price - $380
Parting - I am open to parting if a majority of this can go. But I prefer to sell as a package.
No trades, I have to sell this or my kidney to pay for Vee Twin
Comment