SOLD!!!
So ya, tryin to simplify and reduce a bunch of things in my life as I've reached that critical threshold where I need less in life.
This is the first QuadPheed that Apoc got set up and it has seen plenty of upgrades along the way.
Hasn't been properly fielded in a couple years and is def a users gun. There are videos of it in use on youtube n such so you can look that up if you want.
Asking $1,200 paypaled n shipped in the US. I may be willing to accept pokemon cards as partial trades as well. Trying to complete some sets
Not in a hurry to sell nor will I part (completely against my need to simplify here). If you're outside the US we can chat shipping. Please PM me only if you are interested.
Here's what it has on it:
I don't recommend disassembling the gearheadz adapter plate too much unless you have watched their disassembly video before. It can be a little confusing if you disassemble it and the transfer bar falls out and you don't know where it goes.
Also, as a word of note, the barrel clamps have a set screw on each side that needs to be tightened down to prevent the magazines from coming loose. Once tightened you won't be able to remove the barrels until you loosen them again.
Pictures:
So ya, tryin to simplify and reduce a bunch of things in my life as I've reached that critical threshold where I need less in life.
This is the first QuadPheed that Apoc got set up and it has seen plenty of upgrades along the way.
Hasn't been properly fielded in a couple years and is def a users gun. There are videos of it in use on youtube n such so you can look that up if you want.
Asking $1,200 paypaled n shipped in the US. I may be willing to accept pokemon cards as partial trades as well. Trying to complete some sets
Not in a hurry to sell nor will I part (completely against my need to simplify here). If you're outside the US we can chat shipping. Please PM me only if you are interested.
Here's what it has on it:
- Gearheadz Pheonix Double Phantom Kit (modified to shoot both barrels at once)
- Two 14″ C-Bored CCI Barrels (no freak inserts included)
- Apocalypse Gen4 Phantom QuadPheed Setup (barrel support and feed gate are ABS, feed mechanism is nylon from a MJF printing process which is way stronger)
- Palmers Stabilizer Reg (Last rebuilt 2 years ago)
- My prototype stainless steel Wraith Roller Trigger
- ASP ball detent mod (x2 and mirrored, see pictures below)
- Dye Airport and Mini Drop (has a twist on/off adapter)
- Brass pump rod guide (much smoother and very little wobble)
- Brass trigger shoe
- Generic red/green dot reflex sight
I don't recommend disassembling the gearheadz adapter plate too much unless you have watched their disassembly video before. It can be a little confusing if you disassemble it and the transfer bar falls out and you don't know where it goes.
Also, as a word of note, the barrel clamps have a set screw on each side that needs to be tightened down to prevent the magazines from coming loose. Once tightened you won't be able to remove the barrels until you loosen them again.
Pictures:
Comment