94 Grey Ghost updated

[Teampredator00]

94 Lapco Grey Ghost updated for modern paint . Marker was modified by BMC fab. Now cocker threaded and freak bored for standard inserts. Homemade carbon fiber stick feed. Oldschool ring T stock , holds any 2” OD tank . This works great on HP. Velocity adj bolt, Homemade grip panels . CCI velocity tool now works with this .( 1/4 hex )
Asking SOLD
+ S/H





Sent from my iPhone using Tapatalk

[Teampredator00]

Sent from my iPhone using Tapatalk

[Teampredator00]

Sent from my iPhone using Tapatalk

[Grendel]

Pump return spring still functional after the barrel modifications?

[Teampredator00]

Pump return spring still functional after the barrel modifications?

There is no pump return spring on these models from back in the day being a 1 piece body/barrel


Sent from my iPhone using Tapatalk

[Grendel]

hmmm, so yours looks like a pretty early version. I had not noticed the swing trigger and the frame that closely. As you can see in my old Grey Ghost it has a return spring (unibody is turned down for the barrel and to accommodate a return spring. Mine was purchased circa 1990. I had seen earlier versions with swing triggers but they tended to be more one offs Colin made just didn't remember any that did not have a return spring.

I really do not need to add to my LAPCO collection but to have a removable barrel Ghost is definitely calling my name.

[Loophole]

The triggerframe looks like a Carter Machine swing to me.

[Grendel]

Colin used a few different frames early on and it could be a Carter or a NW (Nicki Wilson's copy of a Carter) for sure but definitely is an appropriate frame type for early Ghosts. It has the milled Grey Ghost and early ones lacked serial numbers. Definitely tempted.

[Araphel]

Very early ones had the nw/Carter frames. Mine also has a boss on the barrel for a return spring.

[Chuck E Ducky]

Unrelated question, where did you get the CF material for that feed tube?

[XEMON]

I might be able to hook you up ... Shoot me a PM if you're still looking for something 👍

[Teampredator00]

hmmm, so yours looks like a pretty early version. I had not noticed the swing trigger and the frame that closely. As you can see in my old Grey Ghost it has a return spring (unibody is turned down for the barrel and to accommodate a return spring. Mine was purchased circa 1990. I had seen earlier versions with swing triggers but they tended to be more one offs Colin made just didn't remember any that did not have a return spring.

I really do not need to add to my LAPCO collection but to have a removable barrel Ghost is definitely calling my name.

I stand corrected , apologies haven’t had it apart in ages . Barrel is stepped and to counter the loss of about 1” of barrel to threading i printed a
sleeve to make the pump handle snap back more and stay forward to keep breach closed


Sent from my iPhone using Tapatalk

[Teampredator00]

Unrelated question, where did you get the CF material for that feed tube?

eBay , printed the feed gate to match the tube size.


Sent from my iPhone using Tapatalk

[Cunha]

So tempting

[Teampredator00]

So tempting

And soooo sexy , you’d be the envy of all the old school fans , no roll outs, velocities tight at 280😍😍😍


Sent from my iPhone using Tapatalk

[Teampredator00]

Old school fans rejoice!!! now more gooder with threads and bores


Sent from my iPhone using Tapatalk

[Cunha]

Bump for awesome

[Teampredator00]

Super sexy lapco OG


Sent from my iPhone using Tapatalk