For sale I have what I'm 90% sure is a Piranha SB with a Piranha LB pump handle. It shoots 260s-280s on CO2 and mid-low 200s on 800psi HPA with the velocity choke screw fully open. It has light wedgits in the barrel, the body is cut for a quickstrip slot and the trigger guard is drilled for an Allen key. It seals up and shoots fine for all practical purposes; but:
1. The cupseal is on its last legs (picture 3) and will leak at low pressure (cock before airing up).
2. There is a VERY slight leak coming from the air transfer port on the body (it's inaudible, I only know it's there because I tested with soapy water). It looks like there was some pitting around the port that was filled in with JB weld. I've already tried polishing the area (picture 4) to no avail. You might be able to skim a tiny bit off the body with a mill, but I don't know if that would change the height difference between the two air transfer ports too greatly.
3. The air transfer banjo bolts seem to come loose from time to time. It's solved with a quick retorque.
4. The Philips screw heads on the frame are just about stripped out. I'd recommend replacing them with #8-32 button heads anyway.
Again, it airs up and shoots fine for all practical purposes, I just wanted to be transparent about its quirks.
Looking for *SOLD* $100 CAD *SOLD* plus shipping OBO. Or try your trade if you're local. Any questions please ask.
Sent from my Pixel 4a using Tapatalk
1. The cupseal is on its last legs (picture 3) and will leak at low pressure (cock before airing up).
2. There is a VERY slight leak coming from the air transfer port on the body (it's inaudible, I only know it's there because I tested with soapy water). It looks like there was some pitting around the port that was filled in with JB weld. I've already tried polishing the area (picture 4) to no avail. You might be able to skim a tiny bit off the body with a mill, but I don't know if that would change the height difference between the two air transfer ports too greatly.
3. The air transfer banjo bolts seem to come loose from time to time. It's solved with a quick retorque.
4. The Philips screw heads on the frame are just about stripped out. I'd recommend replacing them with #8-32 button heads anyway.
Again, it airs up and shoots fine for all practical purposes, I just wanted to be transparent about its quirks.
Looking for *SOLD* $100 CAD *SOLD* plus shipping OBO. Or try your trade if you're local. Any questions please ask.
Sent from my Pixel 4a using Tapatalk
Comment