Gold CCI Phantom with multiple configurations for a cool person to buy

[Jonnydread]

Going a different direction with my Phantom shenanigans, so this sumbitch is up for grabs.

I recently gassed up the marker with a fresh 12g: no leaks and was shooting around 250 fps on a 40°F day with tiny paint. With larger paint or a warmer day you should have no trouble hitting field velocity. Many of the parts are in excellent shape, but this was a player's marker so there is some barrel rub, dings, etc. The oDm handle has some minor sun fracturing, but it doesn't affect function at all and everything holds tightly. I tried to highlight the most noticeable imperfections, but if you want more specific pictures please let me know.

Parts list:

• Gold center feed stock class body, ASP modded
• Gold BBA
• Gold 10-rd feed tube
• Gold ghost ring
• Gold 11" CCI barrel, not bored.
• Gold open class body
• Gold open class with screw-on feedneck, ASP modded
• Gold .45 frame with Hogues & trigger shoe
• Yellow (not gold, see pics) dual rod undercocking kit with oDm pump handle
• Gold CCI bucket 12g changer
• Gold VSC kit with V/A & hardline valve body (note: the hardline is slightly bent and will need to be re-aligned before use)
• OG CCI manual for cool guy points
• 13ci/3k tank (not pictured)
• Misc. stock class shit (let me know if you need anything and I can probably provide)

Asking $600 tyd, not interested in trades unless they come with cash. I am open to offers, especially if you are looking to break into stock class or finish a build. PM me, worst I can say is no (thank you, cutie).

Any questions just holler at me.

I reserve the right to refuse sale per my discretion.

[Jonnydread]

More pics and stuff:

[nnolt89]

Dang - that’s almost as nice looking as you

[Jonnydread]

😘

[Impactfour]

I was this close to tagging you in case you wanted any of the parts, then went to double check if there were any parts you didn't have already available. I was a little disappointed for a moment to see they didn't have any you don't already have, and then it hit me.

[Jonnydread]

I knew you’d get there!

[gzero]

Would you mind a pic that shows the bend in the hardline? Thanks in advance!

[Jonnydread]

Would you mind a pic that shows the bend in the hardline? Thanks in advance!

No problem, I'll get you a pic tonight.

[Jonnydread]

Would you mind a pic that shows the bend in the hardline? Thanks in advance!

Here you go, I did a stupid when I was removing it and the end bent a bit. It's not crimped and I think with a vice/pliers/etc. it could be useable again. The fittings themselves are in perfectly functional shape so worst case scenario you could just replace the line. Let me know if you have any more questions/requests and feel free to offer up