Featherlight Minicocker

[LA.Loic]

For sale or trade. A very limited production gun from Wgp. This P- block predated the sto.
I found the body and tried to build it up with parts of the era.
14” ss dye barrel
Pot metal frame, lapco grips, brass trigger shoe, autocockerparts.com plate.
Front block:
Shockteck bomb 3 way /ram.
Palmers micro rock.
Ans banjo bolt.
Black ice unireg
Pure energy / pmi Thor bottom line reg.

She’s got a handful of little defects and problems.
Hammer adjustment hole drilled after ano.
Helicoiled rear body threads
Non matching back block
Feedneck scratches from an early power feed.
Timing rod is a chewed up inceptions. Should be a classic sized timing rod. 3 way actuation has never been perfectly smooth. Would probably clean up with a correct timing rod and different 3 way.

She works well. Trigger pull could benefit from a little attention and of course the barrel is too big for most paint ( comes with a free dummy insert).

$350. + shipping
for the entire gun. -$30 if you don’t want one of the regs ( I’d be happy to keep one or both of the regs).
I’ll part the gun if I don’t sell it whole and get enough interest.

Dry firing vid.
https://youtu.be/oAAmcRTdWwQ

Trades: emek gmek + - $ accordingly.

[RuleOfSines]

Interested pending pics…

[Alexndl]

2 minutes really, you need to let some for the slower folks (slower in a good way)

[RuleOfSines]

I waited two minutes!!!

[Olsson]

FFS, your timing is absolutely crap, dear sir. I just spent $400 of my fun-budget on AGD parts... Oh well, I'll get in line too, and hope that either it gets sold, or that I'll pass depending on the pics.

[Ecapnation]

So.... You bought a body? Lol

[Olsson]

Nope, that would have been a part. Not parts. I just bought meself a pile of annoed original parts to dress up my precious Automags for the spring collection.

[LA.Loic]

Pictures are up.
And here is a video of it dry firing.

https://youtu.be/oAAmcRTdWwQ

[iamthelazerviking]

That is cooool

[RuleOfSines]

That is really cool, I’ll be smart though and defer to whoever else is interested

[Ecapnation]

Is there no serial number?

These are pretty obscure wgp pieces.... I'm tempted but I'd be stripping it to stock parts

[LA.Loic]

The serial number is on the bottom side of the body between the trigger frame and front block.
It is 6408

[Olsson]

Nice looking piece for sure. But I'll simply have to let this one go, my wallet just can't take another beating in rapid succession. Actually, perhaps I should lay off buying paintball stuff for a while...

[Hellion360]

This is very interesting, I want it but really shouldn't.

[scottieb]

If this was vertical feed I would give you double your asking price.

[Ecapnation]

Shot you a pm

[Cunha]

Damn about the helicoiled threads. Back
block can probably be remedied.

this is one of my fave cockers

[Cunha]

I wanna add that one can permanently not only repair but also upgrade threads by installing the CCI stainless thread inserts they use in phantoms.

The back block can be cut to fit, traded, or a new one can be made.

Such a cool cocker

[LA.Loic]

I found some bits and pieces that I now realize needed to be a part of this sale.
I will now include a 3 way and ram that were with the body when I bought it. They were both rebuilt and should work, though the 3 way is absolute dogshit.
also included are Teflon orings to rebuild the Thor reg ( these need to be shared with MCBr’s).
There are some automag reg guts to swap out the Uni reg guts for when the seat eventually goes out.
And lastly, an old cocking rod. It’s too long but I really like the look and I wanted to put the end piece on a shorter stem, then give the new stem an oil treatment to give it a real vintage look.

[LA.Loic]

Iforgot to add this in the picture. I think that it’s called a Rex dialer ivg. All these goodies are pretty darn nice, I should almost be asking for more $$$$.

[LA.Loic]

This IVG has the Allen keyhole. The gun Currently runs something similar to the ANS IVG.