3357

[RuleOfSines]

Rough 3357, cylinder is there but missing decent and cracked. Racked grip, No safety, cylinder shaft may be slightly bent? $200 obo to the US only.

[Arthur]

Does it air up and fire?

[RuleOfSines]

Does it air up and fire?

It does not.

[RuleOfSines]

Beep

[RuleOfSines]

So against all odds, this is actually holding air and firing. Can't guarantee it will stay that way, all I did was open it up and oil it a bit.

[Solmangrundy]

Vigilante pellet gun parts will swap into this.

so it leaking isn't an issue it's more or less does it have the right parts inside. 3357 have a different linkage that makes it to where it will turn the 6shot paintball cylinder.

But judging by the pictures. That cylinders teeth are toast and will need a transplant/hacknglue from the pellet gun cylinders to get that cylinder working again.

There are some guy out there that make 3d printed repos too I believe.

[parkey990]

Vigilante pellet gun parts will swap into this.

so it leaking isn't an issue it's more or less does it have the right parts inside. 3357 have a different linkage that makes it to where it will turn the 6shot paintball cylinder.

But judging by the pictures. That cylinders teeth are toast and will need a transplant/hacknglue from the pellet gun cylinders to get that cylinder working again.

There are some guy out there that make 3d printed repos too I believe.

Correct! I Havent tried his cylinders, but I know Sellsword does. Link below:

https://sellswordspaintball.com/products/crosman-3357-cylinder/