Old Nelsons pumps, spring kits, 12g changers, 7oz tanks, parts etcetera etcetera,

[James_Blond]

To the best of my knowledge all of these are mostly likely former rentals from Splat Zone Survival in Minnesota during the 90s. Bought this in a CL lot from the former owner who is moving back to Minnesota from CO. There is much more stuff in the pipeline as I work through it all. I have broken these guns down and given them a quick clean and oil. Current fps on 12g will be noted as well as stand out defects, but all have typical wear that you would expect (anno wear from pump handle, barrel plugs, tool marks on thumbscrews) and all were holding pressure without leaking, Most bolt orings are still original unless they were totally trashed.

Priced without shipping. Buy more and save!

Up first 3 Razorback 1s. Typical fixed barrel, spring/shim adjustable velocity, Nelson based gun. Big thumb screws on all three are heavily worn, anno gone,


SOLD $30 $ Razorback A: pictured at top.
Missing 2/4 pump arm screws. Has black cup seal, was shooting 248-268fps on 12g in 60-70degree weather. I forget what spring combo is in there. Pump stroke quite smooth. Grip has slide door on the bottom.

SOLD $30 Razorback B: pictured middle
Rear grip frame thumb screw gone, replaced with hex machine screw, missing grip slide door on bottom. Pump stroke sticks a bit, I think from the bolt oring. Sprung with red valve spring, will dry fire most of the time. Brass cup seal body. Shooting 270-280fps on 12 g. 60-70 degrees

SOLD $30 Razotback C: pictured bottom
Pump arm taped probably missing some pump arm screws, black cup seal, red valve spring, shooting around 225fps on 12g. 60-70 degrees. Dry fires with smooth pump stroke.



SOLD $45 Razorback 2.
Pretty good shape overall. Thumbscrews are heavily worn. Pump stroke is pretty good, Lonestar grip has trap door. Tape on pump arm, so may be missing some pump arm screws. Body is pretty good shape, with ceramic coating not showing much wear. Has manual and sight rail (no screws for mounting). Was shooting low at 200-225fps. But buy a spring kit and be happy or don’t…and shim.

[James_Blond]

SOLD $35 Tippmann SL-68: Comes with partial main spring kit. Replaced the rotted urethane bolt oring with a Buna one to get ya by. Has sling, trap door on lonestar grip. No cracks in feedneck, pump stroke is pretty typical for SLs. Serial 3517. Shooting 190-200 with my typical 12g and crap paint, but hey you get some extra springs. Top of sight rail is raw, looks to have been filed for some reason.





Last but not least.

$90 (High Low, Goldilocks?) Prostar Labs Warrior: early model as best I can tell. No name or serial number.

Missing original thumbscrew on pump arm, but I put a regular Allen screw there for now, would suggest blue loctite or maybe a nylon spacer between the arm and the body for a smoother stroke. Lonestar grip has trap door. Bolt is adjustable with the down the barrel velocity adjuster. pictured Powertube and cups seal is bad, was dumping down the barrel. Used the NOS one originally in the bag and it sealed up. Was able to adjust fps up in the 280-290 range about 10shots into the 12g in 50-60 degree weather this afternoon. Purple valve spring. Bolt oring is causing some stick at start of pump stroke, probably swollen or wrong size, but functional. Safety works (maybe this should have come first?).

Also has 12g dropout changer pictured below in the misc section. If you won’t want it, I can sell it separately, but until then included with gun and reflected in price.




7oz co2 tanks ranging form 89-92. All need hydro, no idea if the valves are still good. .

Starting from left.

$20 Thermo valve tank. Really nice shape, had a slight hiss of co2 still in it. Valve is very nice shape. Has tape on it saying $44.

$15 unmarked siphon tank judging from the rolling rattling sound at the bottom. (Also I have one claiming to be a siphon tank that I’m keeping for now)

all the rest $10 or $5 with a gun purchase.

[James_Blond]

7oz butt plates

5 standard: $5 or free with tank purchase
SOLD 2 clamping: $5 or free with tank purchase.
2 banana style CPS?(little p inside an S inside a C), very comfy: $7ea. (Keeping 2 7s and 20oz for myself.


Dropout 12g changers:
$25(packaged with Warrior above) Nelson valve body style changer. Dusty but in good Shape. Swap your back bottle guts into this and boom stockclass glory awaits. Untested, cup seal looks all right. On second look, will not fit the razorbacks due to the grip frame screw being further back. But does match the Warrior, will package with the Warrior unless buyer only want gun and not changer then it will be for sale down here.

3 screw in bucket style dropouts, er the whole body twists like a bucket, but has a side slot.

$20 Shipped Scratched up one. Tested, currently holding air, Now has new buna 90 tank oring. Updated price to include shipping.

SOLD $20 Good shape one in middle, needs new tank oring, untested. Probably have one if you don’t. Lmk.

SOLD $25 Very good shape, tested works fine, probably wasn’t ever used until me.
SOLD $20 good shape CCI changer (looks better on my pmi, but I’m keeping my rat attack.) Got this on MCB a few years ago. Currently stuck together, will try to unstick before shipping.

[James_Blond]

Nelson springs: with Phantom springs kits being $16 hopefully I’m priced decently. Bundle and save.

SOLD 2 N.O.S. NW spring kits. 3 Main and 3 valve springs each. $10 Each.

SOLD$30 Big bag of nelson springs mix of colors and used and new?: 22 Mainsprings, 28 valve springs.

Pending $10 Bag of probably razorback bolt and hammer and misc. Bolt has arm threads on both sides and brass sleeve/carrier. The longer power tube appears to be slightly bent at the threads to the cup seals. Short tube has larger threads. All appear used. Has a couple main and valve springs.

SOLD $5 for 2 powertubes. One has hex nut, other has flats.

$3 NOS brass valve nut. Not sure if this is universal or what gun this is for.

$10 Cocker? valve tool bottom with hex face.

SOLD $10 Sheridan? Valve tool round square face with T handle.

[El Gringo]

I'll start off by picking up the CCI bucket changer to start with
waiting for a complete nelson spring kit as well

[James_Blond]

I got you dude. Got a couple NOS kits and bag of jumbled Nelson’s springs to come.

[El Gringo]

I'll probably take them all. Can never have too many.
Don't know what I've done with the ones I had.

[KMDPB]

Pm'd about the razor backs

[RAZRBAKK]

brb calling my sponsor.

[Chuck E Ducky]

PM’d about the tank butts. You got a nice butt, and my butt just got a crack in it because I over tightened my butt like a Noob.

[Yamess191]

Pmed about razorbacks also

[dasjaco]

Pm’d

[Funsi00]

Screw in drop out changer $25 Very good shape, tested works fine, probably wasn’t ever used until me. Pm sent

[James_Blond]

Pmed back, not sure you saw it.

[Funsi00]

Payment sent, thanks!

[James_Blond]

All Pms replied to, everything paid for has shipped to date. Thread should be current with what is sold and what is available.