An Early Earon Carter Comp.
A Steel press fit unibody refreshed by me. Barrel replaced with a PPS nickeled brass in 680 with light wedgits.
PPS SC Tube Nickeled
CCI Changer Nickeled
Carter internals, but an ICD powertube which got me excellent results.
This marker has shot some famous faces like Painthappy and MAr I don't take this one out as much as I should so I am going to put it up for sale, but it won't be cheap.
Moved to open from Member's Section
It was originally a darker green which you can see when the grips are removed. but it has faded to a really sweet metallic light green, almost Olive.
$1000 Shipped. SOLDSOLDSOLDSOLD
Also, quoted from the original thread:
A Steel press fit unibody refreshed by me. Barrel replaced with a PPS nickeled brass in 680 with light wedgits.
PPS SC Tube Nickeled
CCI Changer Nickeled
Carter internals, but an ICD powertube which got me excellent results.
This marker has shot some famous faces like Painthappy and MAr I don't take this one out as much as I should so I am going to put it up for sale, but it won't be cheap.
Moved to open from Member's Section
It was originally a darker green which you can see when the grips are removed. but it has faded to a really sweet metallic light green, almost Olive.
$1000 Shipped. SOLDSOLDSOLDSOLD
Also, quoted from the original thread:
The barrels is a tight fit, glued, and pinned with a custom threaded nut boss. That boss is threaded internally for the front frame screw, and is then threaded into the body/barrel assembly locking everything together. The barrel was made special for this marker. I have not seen PPS do press fit barrels on other Nelsons. To my knowledge this was the first and only, but I have never specifically asked Craig.
Comment